Lantech IES-5416T (IP67/IP54) is a high performance L2+ (Gigabit uplink) Ethernet switch with 16 10/100TX (D-coded) + 4 10/100/1000T (X-coded) with M12 provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports train ring, enhanced mode, multiple VLAN mode with easy configuration. The comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+**, SSH v2/SSL and Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ are supported and also required in large network. It also supports Cisco Discovery Protocol (CDP) for Ciscoworks to detect the switch info and show on L2 map topology.
Wide input range model (WV) and optional 24V
The Lantech IES-5416T (IP67/IP54) is designed with dual power supply ranging from 16.8V~137.5VDC. 24V model can accept 12V~56VDC. Featured with relay contact alarm function, the IES-5416T (IP67/IP54) is able to connect with alarm system in case of power failure or port disconnection events. A voltage which can be minimal 0,5 Un nominal voltage (when Vin≧36V) and/or a voltage which can be maximal 1,5 Un nominal voltage for more than 1000 consecutive ms (one second).
Miss-wiring avoidance, Loop protection, Node failure protection
The IES-5416T (IP67/IP54) also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IES-5416T (IP67/IP54) is able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. For the ending device which need to download file from TFTP server, DHCP Option66 server can offer IP address of TFTP server to DHCP client. Basic IPv6 DHCP service can be supported.
Editable configuration file; Optional N-key auto backup, exported text file
The configuration file of Lantech IES-5416T (IP67/IP54) can be exported and edited with word processor for the other switches configuration with ease. The built-in watchdog design can automatically reboot the switch when CPU is found dead. The optional N-key configurator offers firmware upgrade, auto/editable configuration back up and restoration without computer by adjusting the DIP switch.
User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes IES-5416T (IP67/IP54) much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.
Built-in IEC 61375-3-4 ECN (Ethernet Consist Network) to work with IEC61375-2-5 ETBN
Lantech OS1 Ethernet switches comply with IEC 61375-3-4 (ECN) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (ETBN).
Enhanced G.8032 ring, 16 MSTI MSTP; MRP Ring
Lantech IES-5416T (IP67/IP54) features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers multi-chain (under enhanced ring), train ring, basic ring, multiple-VLAN ring and auto-ring by easy setup than others. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows RSTP over VLAN for redundant links with 16 MSTI. MRP (Media Redundancy Protocol) can be supported for industrial automation networks.
QoS by VLAN for legacy device
QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network.
QinQ, QoS and GVRP supported
It supports the QinQ, QoS, GVRP for large VLAN segmentation.
IGMPv3,GMRP, router port, MLD Snooping, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port, MLD snooping and static multicast forwarding binding by ports for video surveillance application.
Event log & message; 1 DI + 1DO
In case of event, the IES-5416T (IP67/IP54) is able to send an email** to pre-defined addresses as well as SNMP Traps out immediately. It provides 1DI and 1DO when disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps.
Environmental monitoring for switch inside information
The environmental monitoring can detect switch overall temperature, voltage and current where can send the SNMP traps, email** when abnormal.
EN50155, EN45545-2, EN61373 compliance; High ESD protection
Lantech IES-5416T (IP67/IP54) features high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in factory, substation, steel automation, aviation, mining and process control. It is the best solution for Automation, transportation, surveillance, Wireless backhaul, Semi-conductor factory and assembly lines.
The IES-5416T (IP67/IP54) is designed to meet with critical network environment with IP67/IP54 aluminum enclosure and M12 connectors for water proof. With EN45545-2 Fire & Smoke, and EN50155 & EN61373 verification, the IES-5416T (IP67/IP54) is the best for railway in train/track side, vehicle and mining applications. For more usage flexibilities, IES-5416T (IP67/IP54) supports wide operating temperature from -40°C to 75°C. IES-5416T (IP67/IP54) also provides ±2000V EFT and ±6000V ESD contact protection, which can reduce unstable situation caused by power line and Ethernet
Optional bypass relay prevent from power lost (IP67 Only)
The optional bypass relay is set to bypass the switch to the next one when power is off in order to protect the network from crashing. Lantech bypass caters to remain in bypass mode until the switch is completely booting up when power is back to avoid another network lost. Smart bypass can be activated when switch encounters power failure. (-BT/-BBT model)
|8360-6122||IES-5416T-X-67-24V||4 1000T + 16 10/100TX EN50155 L2+ M12 IP67 Managed Ethernet Switch; -40°C to 75°C; 12~56VDC dual input|
|8360-6123||IES-5416T-X-54-24V||4 1000T + 16 10/100TX EN50155 L2+ M12 IP54 Managed Ethernet Switch; -40°C to 75°C; 12~56VDC dual input|
|8360-7366||IES-5416T-X-67-WV||4 1000T + 16 10/100TX EN50155 L2+ M12 IP67 Managed Ethernet Switch; -40°C to 75°C; 16.8~137.5VDC dual input|
|8360-7367||IES-5416T-X-54-WV||4 1000T + 16 10/100TX EN50155 L2+ M12 IP54 Managed Ethernet Switch; -40°C to 75°C; 16.8~137.5VDC dual input|
|8850-100||N-key Configurator||RJ45 connector dongle for firmware upgrade, auto/editable configuration backup and restoration; -20°C to 60°|
|ECONM12-05A(M)-C-180||5 pin M12 (Male) A-coded 180 degree crimp type connector for DI/DO|
|ECONM12-08X(M)-SPEEDCON||8 pin M12 (Male) X-coded 180 degree crimp type connector for data, Ethernet CAT6A (10G), shielded, SPEEDCON|
|ECONM12-04D(M)-C-180||4 pin M12 (Male) D-coded 180 degree crimp type connector for data|
|ECONM12-5P(F)70CM CABLE||5 pin M12 (Female) A-coded 90 degree cable for power supply, 70cm|
|ECABM12X83MSTP||8 pin M12 (Male) X-coded 180 degree RJ45 STP cable for data, shielded, 300cm|
|ECAB124030MJS||4 pin M12 (Male) D-coded 180 degree RJ45 STP cable for data, 300cm|