Logo

IPES-0104GT-4

4 10/100TX PoE at/af + 1 10/100/1000T Industrial Unmanaged Switch

  • Complies with IEEE802.3at/af PoE standard
  • Redundant power supply with overload current protection
  • Wide operating temperature range from -40°C to 75°C (-E model)
  • Support 12V to 48V DC booster design for vehicle application(12V model)
  • High power provides up to 30W output per port



Datasheet   Manual

OVERVIEW

The Lantech IPES-0104GT-4 is a 4-port 10/100TX + 1 GigaT with 4 PoE Injector Industrial PoE at/af Switch for plug-and-play installation. This slim switch is designed with Wall-mountable** or DIN rail mountable, making installation more easy.


Besides redundant power supply with overload current protection, the IPES-0104GT-4 provides ±2000V EFT/SURGE and ±6000 VDC (Contact) / ±8000 VDC (Air) Ethernet ESD protection, which can reduce unstable environment damage caused by power line and Ethernet. Featured with relay contact to alarm system function, the IPES-0104GT-4 can immediately notify of power failure event.


The IPES-0104GT-4 is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. It also passed stability testing such as free fall, shock and vibration.


The Lantech IPES-0104GT-4 is the best Industrial switch to connect with IP Camera, Wireless Equipments where are placed outdoor or in tight space cabinet. The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.


The IPES-0104GT-4 supports the high power PoE standard which provides higher power output up to 30W per port for devices that require higher power supply.


With voltage boost design, the IPES-0104GT-4-12V can work from 12/24V input power source and boost the voltage to 48VDC to feed the POE power over Ethernet cable for any vehicles that usually has 12/24V power source. The slim compact design is able to fit in variety of cabinets and space.


**Optional

FEATURES

  • System Interface/Performance
    • RJ-45 port support Auto MDI/MDI-X Function
    • Embedded 4-port PoE Injector Function
    • Store-and-Forward Switching Architecture
    • Back-plane (Switching Fabric): 2.8Gbps
    • 8K MAC address table
  • Supports Wide Operating Temperature (-40°C~75°C)
  • IP-30 Metal Housing with DIN Rail and Wall Mount** Design
  • Power Supply
    • DC44~56V dual input (48V model)
    • DC9.5V~56V dual input (12V model)
  • Provides EFT protection ±2000 VDC for power line
  • Supports ±6000 VDC (Contact) and ±8000 VDC (Air) Ethernet ESD protection
  • Relay output for power fail and alarm
  • Built-in 12 to 48V DC-DC converter for PoE(12V model)
**Optional

SPECIFICATIONS

Hardware Specifications

IEEE Standards

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet
IEEE802.3ab 1000Base-T
IEEE802.3x Flow Control and Back Pressure
IEEE802.3at/af Power over Ethernet

Switch
Architecture

Back-plane (Switching Fabric): 2.8Gbps

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Ethernet / Gigabit Fiber port

MAC Address

8K MAC address table

Connectors

10/100TX: 4 x RJ-45 with auto MDI/MDI-X function
10/100/1000T: 1 x RJ-45 with auto MDI/MDI-X
Support 4 PoE injector function

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable
EIA/TIA-568 100-ohm (100m)

PoE PIN
Assignment

RJ-45 port #1 - #4 support IEEE 802.3af End-point;
Alternative A mode.
Positive (VCC+): RJ-45 pin 1,2
Negative (VCC-) : RJ-45 pin 3,6
Data (1,2,3,6)

Protocol

CSMA/CD

Case
Dimension

IP-30,
12V model: 43(W) x 105(D) x 152(H) mm
48V model: 35(W) x 105(D) x 152(H) mm

Weight

 800g

LED

Per unit: Power 1 (Green), Power 2 (Green), Fault (Red)
4 port 10/100TX: Link/Activity (Green), PoE (Yellow)
1 port 10/100/1000T: Link/Activity(Green), Full duplex/Collission(Yellow)

Power Supply

44~56VDC dual input for 48V model;
9.5V~56VDC dual input for 12V model

Power
Consumption

6W

PoE budget

120W@48VDC ; 120W@24VDC ; 80W@12VDC

Operating Humidity

5% to 95% (Non-condensing)

Operating Temperature

-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F (-E model)

Installation

DIN Rail and Wall Mount** Design

EMI &EMS

FCC Class A,
CE EN61000-4-2(ESD),
CE EN61000-4-3(RS),
CE EN61000-4-4(EFT),
CE EN61000-4-5(Surge),
CE EN61000-4-6(CS),
CE EN61000-4-8,
CE EN61000-4-11,
CE EN61000-6-2,
CE EN55032 Class A, CE EN55024

Stability
Testing

IEC60068-2-32(Free fall),
IEC60068-2-27(Shock),
IEC60068-2-6(Vibration)

Warranty

5 years
**Optional

DIMENSION

12V model

48V model

ORDER INFORMATION

P/N Model name Description
8350-922 IPES-0104GT-4-48V 4 10/100TX w/4 PoE at/af Industrial Switch + 1 GigaT; -20°C~60°C; 44~56VDC dual input
8350-923 IPES-0104GT-4-48V-E 4 10/100TX w/4 PoE at/af Industrial Switch + 1 GigaT; -40°C~75°C; 44~56VDC dual input
8350-924 IPES-0104GT-4-12V 4 10/100TX w/4 PoE at/af Industrial Switch + 1 GigaT; -20°C~60°C; 9.5~56VDC dual input
8350-925 IPES-0104GT-4-12V-E 4 10/100TX w/4 PoE at/af Industrial Switch + 1 GigaT; -40°C~75°C; 9.5~56VDC dual input


OPTIONAL ACCESSORIES - DIN Rail Power

Model name Description
NDR-480 Series 480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-240 Series 240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-120 Series 120W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)
NDR-75 Series 75W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)

About Lantech

Lantech is an IRIS-certified company that offers a complete family of industrial networking products. Lantech products and solutions provide for the delivery of universal Ethernet services across various markets and applications. Learn More

Taiwan Quality

Lantech is dedicated to providing the best quality and service to our customers. We proudly provide 5 years warranty to our industrial products. Learn More

Contact Us

15 McCabe Street,
North Fremantle, WA 6159
Tel : +61 8 6558 0818
Email: sales@lantechcom.com.au
Product Inquiry Form

2020 © Lantech Communications Australia Pty Ltd. ALL Rights Reserved. Privacy Policy | Terms of Service