The Lantech IPES-2208CB is a full wire speed 8-port 10/100BaseTX + 2-port 10/100/1000T/Dual Speed SFP Combo industrial PoE switch w/8 POE 802.3at/af Injectors and Pro-Ring IIse and couple ring (Pro-Ring IIm) self-recovery in less than 20ms. The SFP connection is suitable with 100M or 1000M Dual Speed. The advanced SNMP management features include QoS for 4 queues, 802.1q VLAN, IGMP snooping, query and source only for multicast IP surveillance, DDM*** as well as Web Ping, Environmental Monitoring**, SNTP and SMTP etc.
Compliant with 802.2at/af PoE Plus standard, the Lantech IPES-2208CB is able to feed each PoE port up to 30 Watts@54 VDC providing the connected PD devices. The built-in relay contact is able to connect with alarm system and send Email, SNMP trap and Syslog alert in case of power or connection failure. IPES-2208CB-12V is built with Booster technology that can accept input voltage from 12V ~ 48V and deliver PoE power at 48V to feed the PD.
Lantech IPES-2208CB supports advanced PoE management including PoE detection, delay and scheduling. PoE detection can detect if the connected PD is hanging up then restart the PD; PoE delay is to delay power feeding when the switch is completely booted up; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. The exclusive IGMP source only function can auto choose IGMP query for surveillance application.
The innovative Pro-Ring IIse self-recovery scheme can recover single ring network in less than 20ms while Pro-ring IIm for couple ring topology with only one step configuration. Lantech IPES-2208CB builds all the important management features required in large network like DHCP Client/Server, 802.1X authentication, IGMP Query / Snooping / v3 and Source only for reverse multicast flow ,and advanced QoS. It also supports Ping commands via Web to detect whether a specific device is connected for easy trouble-shooting.
The built-in factory reset button can restore all setting back to factory default in case of User name and Password are missing. The optional environmental monitoring model can display ambient temperature inside case, Input voltage, current, power consumption, PoE load info at a glance and with capability of alert setting.
The Lantech IPES-2208CB can support up to ±6KV ESD contact per UTP port to minimize the burn down risk where the electronic static discharge is usually found. It is the best to be used in municipal, city surveillance, automation, transportation, mining, heavy Industrial factory where needs PoE functionality under harsh environment. The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.
IEEE Standards |
IEEE802.3 10Base-T Ethernet |
||||||||
Switch Architecture |
Back-plane (Switching Fabric): 5.6Gbps, support full wire speed |
||||||||
Transfer Rate |
14,880pps for Ethernet port |
||||||||
Packet Buffer |
1Mbits |
||||||||
MAC Address |
8K MAC address table |
||||||||
Flash ROM |
4Mbytes |
||||||||
Connectors |
10/100TX: 8 x ports RJ-45 with Auto MDI/MDI-X function |
||||||||
Network Cable |
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable |
||||||||
Optical Fiber |
1.25Gbps: |
||||||||
Protocol |
CSMA/CD |
||||||||
PoE pin assignment |
RJ-45 port # 1~# 8 support 802.3at/af End-point, |
||||||||
PoE input voltage & Power feed voltage |
|
||||||||
LED |
Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red), Master (Green) |
||||||||
Power Supply |
PoE input 45~56VDC(IPES-2208CB-48V); 9.5V~56V(IPES-2208CB-12V); Redundant power connective removable terminal block for master and slave power |
||||||||
Overload current protection |
Present |
||||||||
Operating Humidity |
5% ~ 95% (Non-condensing) |
||||||||
Operating Temperature |
Standard: -20°C~60°C / -4°F~140°F |
||||||||
Storage Temperature |
-40°C~85°C / -40°F~185°F |
||||||||
Case Dimension |
IP-30, 74(W) x 114.3 (D) x 152 (H) mm |
||||||||
Weight |
850 g |
||||||||
Fan Number |
0 |
||||||||
Installation |
DIN Rail and Wall Mount** Design |
||||||||
EMI & EMS |
FCC Class A, CE EN61000-4-2, |
||||||||
Safety |
UL 60950 |
||||||||
Stability Testing |
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-64 (Vibration) |
||||||||
Power Consumption |
9.86 W (no PoE load) for Ethernet data at full load |
||||||||
PoE Power Budget |
240W @48VDC; 120W @24VDC; 90W @12VDC |
||||||||
MTBF |
865,786 hours |
||||||||
Warranty |
5 years |
Management |
SNMP v1 v2c, v3/ Web/Telnet/CLI |
SNMP MIB |
RFC 1215 Traps MIB, RFC 1213 MIBIIS, |
System Information |
Show detail info incl.Name, Version,CPU load monitoring for every 1,5,15 minutes |
Pro-Ring IIse & IIm |
Pro-Ring IIse fos Single-Ring and Pro-ring IIm for couple ring supporting network recovery in less than 20ms up to 50 switches in a ring. |
20ms recovery is on fiber port. |
|
Ping detection |
Support Ping command through Web to detect the connected devices |
VLAN |
Port Based VLAN |
Port Trunk with LACP |
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk members |
LLDP |
Supports LLDP to allow switch to advise its identification and capability on the LAN |
Spanning Tree |
Supports IEEE802.1d Spanning Tree, IEEE802.1w Rapid Spanning Tree |
PoE Management |
|
Environmental Monitoring ** |
Graphical display of Ambient temperature inside case, Input voltage, Input current, Power consumption, PoE load with capability of alert setting |
Quality of Service |
The quality of service determined by port, Tag and IPv4 Type of service |
Class of Service |
Supports IEEE802.1p class of service, per port provides 4 priority queues |
Port Security |
Supports 100 entries of MAC address for static MAC and another 100 for MAC filter |
Port Mirror |
Supports 3 mirroring types: "RX, TX and Both packet" |
IGMP |
Supports IGMP snooping v1,v2,v3 |
IP Source Guard |
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. |
Login Security |
Supports IEEE802.1X Authentication/RADIUS/Telnet |
Flow Control |
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex |
System Log |
Supports System log record and remote system log server |
SMTP |
Supports SMTP Server and 6 e-mail accounts for receiving event alert |
SNTP |
Supports SNTP to synchronize system clock to Internet |
Bandwidth Control & Storm Control |
Support ingress packet filter and egress packet limit |
Relay Alarm |
Provides one relay output for port breakdown, power fail alarm. |
SNMP Trap |
1. Cold start |
DHCP |
Provides DHCP Client/ DHCP Server/ Port and IP Binding |
DNS |
Provide DNS client feature and support Primary and Secondary DNS server. |
Firmware Update |
Supports TFTP and Web firmware update, TFTP backup and restore. |
Factory reset |
Factory reset bottom can restore all setting back to factory default |
ifAlias |
Each port allows importing 128bits of alphabetic string of word on SNMP and CLI interface |
P/N | Model name | Description |
---|---|---|
8350-784 | IPES-2208CB-48V | 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/8 PoE Injectors 802.3at/af Industrial Managed Switch; 45~56VDC; -20°C to 60°C |
8350-785 | IPES-2208CB-48V-E | 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/8 PoE Injectors 802.3at/af Industrial Managed Switch; 45~56VDC; -40°C to 75°C |
8350-786 | IPES-2208CB-12V | 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/8 PoE Injectors 802.3at/af Industrial Managed Switch; 9.5~56V PoE input; -20°C to 60°C |
8350-787 | IPES-2208CB-12V-E | 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/8 PoE Injectors 802.3at/af Industrial Managed Switch; 9.5~56V PoE input; -40°C to 75°C |
8350-7841 | IPES-2208CB-48V-M | 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/8 PoE Injectors 802.3at/af Industrial Managed Switch; 45~56VDC; Environmental monitoring; -20°C to 60°C |
8350-7851 | IPES-2208CB-48V-M-E | 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/8 PoE Injectors 802.3at/af Industrial Managed Switch; 45~56VDC; Environmental monitoring; -40°C to 75°C |
8350-7861 | IPES-2208CB-12V-M | 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/8 PoE Injectors 802.3at/af Industrial Managed Switch; 9.5~56V PoE input; Environmental monitoring; -20°C to 60°C |
8350-7871 | IPES-2208CB-12V-M-E | 8 10/100TX + 2 10/100/1000T/Dual Speed SFP Combo w/8 PoE Injectors 802.3at/af Industrial Managed Switch; 9.5~56V PoE input; Environmental monitoring; -40°C to 75°C |
Model name | Description |
---|---|
NDR-480 Series | 480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C) |
NDR-240 Series | 240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C) |
NDR-120 Series | 120W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet) |
NDR-75 Series | 75W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet) |
Model name | Description | Model name | Description |
---|---|---|---|
8330-162-V1 | MINI GBIC 1000SX (LC/0.5KM) Transceiver | 8330-187-V1 | LTSFP-1000BX-20KM Transceiver (WDM 1550) |
8330-163-V1 | MINI GBIC 1000SX2 (LC/2KM) Transceiver | 8330-180-V1 | LTSFP-1000BX-40KM Transceiver (WDM 1310) |
8330-165-V1 | MINI GBIC 1000LX (LC/10KM) Transceiver | 8330-182-V1 | LTSFP-1000BX-40KM Transceiver (WDM 1550) |
8340-0591-V1 | MINI GBIC 1000LHX (LC/40KM) Transceiver | 8330-181-V1 | LTSFP-1000BX-60KM Transceiver (WDM 1310) |
8330-166-V1 | MINI GBIC 1000XD (LC/50KM) Transceiver | 8330-183-V1 | LTSFP-1000BX-60KM Transceiver (WDM 1550) |
8330-169-V1 | MINI GBIC 1000XD (LC/60KM) Transceiver | 8330-184-V1 | LTSFP-1000BX-80KM Transceiver (WDM 1490) |
8330-167-V1 | MINI GBIC 1000ZX (LC/80KM) Transceiver | 8330-185-V1 | LTSFP-1000BX-80KM Transceiver (WDM 1550) |
8330-170-V1 | MINI GBIC 1000EZX (120KM) Transceiver | 8330-071-V1 | 125Mbps BiDi SFP 2KM (WDM 1310) Transceiver |
8330-168-V1 | MINI GBIC 10/100/1000T (100m) Transceiver | 8330-072-V1 | 125Mbps BiDi SFP 2KM (WDM 1550) Transceiver |
8330-060-V1 | 100Base FX 2KM, Multi-mode, LC Transceiver | 8330-069-V1 | 125Mbps BiDi SFP 20KM (WDM 1310) Transceiver |
8330-065-V1 | 100Base FX 5KM, Multi-mode, LC Transceiver | 8330-068-V1 | 125Mbps BiDi SFP 20KM (WDM 1550) Transceiver |
8330-061-V1 | 100Base LX 30KM, Single-mode, LC Transceiver | 8330-080 | 125Mbps BiDi SFP 40KM (WDM 1310) Transceiver |
8330-197-V1 | 1.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1310) | 8330-082 | 125Mbps BiDi SFP 40KM (WDM 1550) Transceiver |
8330-198-V1 | 1.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1550) | 8330-081 | 125Mbps BiDi SFP 60KM (WDM 1310) Transceiver |
8330-195-V1 | 1.25Gbps BiDi SFP 2KM Transceiver (WDM 1310) | 8330-083 | 125Mbps BiDi SFP 60KM (WDM 1550) Transceiver |
8330-196-V1 | 1.25Gbps BiDi SFP 2KM Transceiver (WDM 1550) | 8330-084 | 125Mbps BiDi SFP 80KM (WDM 1310) Transceiver |
8330-188-V1 | 1.25Gbps BiDi SFP 10KM Transceiver (WDM 1310) | 8330-085 | 125Mbps BiDi SFP 80KM (WDM 1550) Transceiver |
8330-189-V1 | 1.25Gbps BiDi SFP 10KM Transceiver (WDM 1550) | 8330-191-V1 | Dual Speed SFP 100M/1000M-LX 10KM Transceiver |
8330-186-V1 | 1.25Gbps BiDi SFP 20KM Transceiver (WDM 1310) | All SFP P/N# ended with D are with DDM function |
2020 © Lantech Communications Australia Pty Ltd. ALL Rights Reserved. Privacy Policy | Terms of Service