16 10/100/1000T PoE at/af Industrial Unmanaged Ethernet Switch

  • Support IEEE802.3at/af up to 30W per port
  • Dual 9V~36VDC input compliant with ISO 7637-2*
  • Galvanic isolation protection (power input /Ethernet port to system/case ground; power input to Ethernet port)
  • Max PoE budget 100W at 24V input
  • Relay alarm output for power fail and alarm
  • E-marking* certificate for vehicle application (-24V model)


PoE 802.3at/af 30W FCC CE WEEE RoHS2


Datasheet   Manual

OVERVIEW

Lantech IPGS-0016 is a high performance 16 10/100/1000T industrial Ethernet switch with w/16 PoE 802.3af/at ports.


Galvanic isolation for dual 24V wide input range
The IPGS-0016 supports IEEE802.3af/at standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, high power wireless AP etc.


The IPGS-0016 accepts power input 9~36VDC and is compliant with ISO 7637-2* which protects switch from being damaged by high voltage that could be found at vehicle cranky start.


48V model accept 45~56VDC power input and can feed 48V output for PoE feeding in vehicle at max 240W @48V input.


E-marking* certificate, High reliability and extended working temperature
Lantech IPGS-0016 provides ±2000V EFT and ±6000V ESD protection, which can reduce unstable situation caused by power line and Ethernet. It has high reliability and robustness coping with extensive EMI/RFI phenomenon, environmental vibration and shocks usually found in Automation, transportation, Wireless backhaul, Semi-conductor factory and assembly lines.


The -E model can be used in extreme environments with an operating temperature range of -40°C to 75°C.


The E-marking* certificate makes it the most suitable switch for bus, carriage, other vehicles application as well as for industrial areas.


FEATURES

  • 16 10/100/1000T industrial Ethernet switch w/16 PoE 802.3af/at ports (Total 16 Ports Switch)
  • PoE budget 100W at 24V input
  • Dual 9V~36VDC with ISO7637-2* compliance
  • Back-plane (Switching Fabric): 32Gbps
  • Provides EFT protection ±2000 VDC for power line
  • Supports ±6000 VDC Ethernet ESD protection
  • Galvanic isolation between power input and system/case ground; between Ethernet port and system/case ground; between power input and Ethernet port
  • E-marking* certificate for vehicle application (-24V model)
  • Relay alarm output for power fail and alarm
  • IP30 metal housing with DIN rail and Wall-mount** design

SPECIFICATIONS

Hardware Specifications

Standards

IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3x Flow Control and Back Pressure
IEEE802.3af/at Power over Ethernet

Switch Architecture

Back-plane (Switching Fabric): 32Gbps

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port

Mac Address

16K MAC address table

Connectors

10/100/1000T: 16 x ports RJ-45 with Auto MDI/MDI-X function
Power & P-Fail connector: 1 x 6-pole terminal block

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)

LED

Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red);
Ethernet port: Link/Activity (Green)

Operating Humidity

5% ~ 95% (Non-condensing)

Operating Temperature

-20°C~60°C / -4°F~140°F (Standard model)
-40°C~75°C / -40°F~167°F(-E model)

Storage Temperature

-40°C~85°C / -40°F~185°F

Power Supply

9V~36VDC

PoE Budget

100W at 24V input; 80W at 12V input

PoE pin assignment

RJ-45 port # 1~#16 support IEEE 802.3at/af End-point, Alternative A mode. Per port provides up to 30W.
Positive (VCC+): RJ-45 pin 1,2
Negative (VCC-): RJ-45 pin 3,6

Power Consumption

15W exclude PoE loads(100W)

Galvanic Isolation

Between power input and system/case ground
Between Ethernet port and system/case ground
Between power input and Ethernet port

Case Dimension

Metal case IP-30
74 (W) x 105 (D) x 152 (H) mm

Weight

900 g

Installation

DIN Rail and Wall Mount** Design

Relay Alarm

Provides one relay output for power fail and alarm.
Alarm Relay current carry ability: 1A @ DC24V

EMI & EMS

FCC Class A, CE EN55011,
CE EN55032, CE EN55024,
CE EN61000-4-2, CE EN61000-4-3,
CE EN61000-4-4, CE EN61000-4-5,
CE EN61000-4-6, CE EN61000-4-8,
CE EN61000-6-2, CE EN61000-6-4

Stability Testing

IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)

Vehicle certificate

E-Marking* with E13 granted approval (-24V model)

MTBF

908,270 hrs (standards: IEC 62380)

Warranty

5 years

*Future Release **Optional

DIMENSION

ORDER INFORMATION

All part no. with WALL are models with wall mount kit instead of DIN Rail

P/N Model name Description
8351-126 IPGS-0016-24V 16 10/100/1000T w/16 PoE at/af up to 30W Industrial Ethernet Switch; dual 9~36VDC input; compliant with ISO7637-2*; -20°C to 60°C
8351-127 IPGS-0016-24V-E 16 10/100/1000T w/16 PoE at/af up to 30W Industrial Ethernet Switch; dual 9~36VDC input; compliant with ISO7637-2*; -40°C to 75°C


OPTIONAL ACCESSORIES - DIN Rail Power

Model name Description
NDR-480 Series 480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-240 Series 240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-120 Series 120W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)
NDR-75 Series 75W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)