Logo

IPGS-5400-2P

4 Modular Slots L2+ Industrial Managed PoE at Switch

  • High-density 28 x Gigabit Ethernet L2+ managed (PoE at/af) switch
  • Enhanced G.8032 ring protection < 20ms for single ring. Supports auto mode, enhanced mode, train mode and basic mode; Enhanced G.8032 ring covers multicast packets; MSTP 8/16* MSTI /RSTP
  • Built-in RTC(Real Time Clock)
  • Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82 for Port/Vlan based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH/SSL, HTTPS, INGRESS/EGRESS ACL L2/L3, IPv6, SMS
  • Supports wide operating temperature from -40°C to 75°C (-E model)
  • Miss-wiring avoidance & Repowered auto ring restore
  • User friendly UI, including auto topology drawing and DDM threshold monitoring with dB values***; Complete CLI
  • Support relay contact & environmental monitoring
  • USB slot for edited restoration and auto backup




Datasheet   Hardware Manual   Web UI User's Manual
For latest firmware, please send request to support@lantechcom.com.au

OVERVIEW

Lantech IPGS-5400-2P is a high performance L2 + managed industrial switch which provides L2 wire speed and advanced security function for network aggregation and backbone deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms including dynamic coupling ring, and enhanced mode for easy configuration, comprehensive QoS, QoS by VLAN, advanced security including INGRESS/EGRESS ACL L2/L3, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port, QinQ* (double tag VLAN) which are important features required in train and large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info and show on L2 map topology.


The highly flexible modular design consisting of maximum 24x Gigabit T+4xDual SFP,24x Giga PoE at/af +4xDual SFP, 28xGigabit/100M SFP, 18x100M ST/SC + 4 Gigabit SFP covers the widest deployment of applications.


Lantech IPGS-5400-2P features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering Multicast packets. It also supports various ring topologies that covers double ring, multi-chain (under enhanced ring), train ring, basic ring by easy setup than others. The innovative auto-Ring configurator (auto mode) can calculate owner and neighbor in one step. It supports MSTP that allows RSTP over Vlan for redundant links with 8/16* MSTI.


The IPGS-5400-2P also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech IPGS-5400-2P is able to alert with the LED indicator and send out an email, traps or a SMS text. Repowered auto ring restore function(Node failure protection) ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.


DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application. Optional IPv6 address resolution for DHCP service can be supported.


The user friendly UI, innovative auto topology drawing and topology demo makes IPGS-5400-2P much easier to get hands-on. The IPGS-5400-2P supports DMI interface that can correspond with DDM SFPs (Digital diagnostic monitor) to display the five parameters in Lantech’s UI, including optical output power, input power, temperature, laser bias current and transceiver supply voltage***. The TX power/RX power raw data is automatically converted to dB values for installer, making it easier to calculate the fiber distance. Complete CLI support allows professional setting.


Lantech IPGS-5400-2P configuration file can also be exported in text file so that it can be edited and configured back to switch with ease for mass deployment. The factory reset button can restore the setting back to factory default and built-in watchdog design can automatically reboot the switch when cpu is found dead. The USB slot allows user to backup/ restore configuration.


QoS by VLAN can allow switch to tag QoS by VLAN regardless the devices acknowledge QoS or not in which greatly enhance the bandwidth management in a network.


The environmental monitoring can detect switch temperature, voltage and current where can send the SNMP traps, email and SMS alert when abnormal.


The PoE modules support advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. It also supports per-port PoE status including current, voltage, watt and temperature information.


The IPGS-5400-2P DIDO function can support additional open/close physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the switch was moved or stolen. In case of events, the IPGS-5400-2P will immediately send an email to pre-defined addresses as well as SNMP Traps out. It provides 2DO while disconnections of the specific port was detected and relay contact will activate the alarm. 2 DI can integrate the sensors into the auto alarm system and transfer the alarm information to IP network with email, SMS and SNMP.


Lantech IPGS-5400-2P chassis and modules are designed for easy maintenance and installation; It also supports dual power supplies (DC12~48V/ isolated 36~75VDC) and (isolated 85~265VAC/100~370VDC) to increase the network reliability. It also supports terminal block for connecting DC 48V PoE power source.


Lantech IPGS-5400-2P features high reliability and robustness withstanding extensive EMI/RFI phenomenon, inductive load switching, high ESD (±8000V ESD/ ±4000V EFT), high fault current environment usually found in Steel automation, Mining and Process control etc. IGS-5400-2P can run under widely operational temperature ranging from -40°C~75°C (-E); in the harsh and critical environment.


*Future Release
**Optional
***Optional DDM SFP required

FEATURES

  • System Interface/Performance
    • maximum 24x Gigabit T+4 Dual SFP,24x Giga PoE at/af +4Dual SFP, 28xGigabit/100M SFP, 18x100M ST/SC + 4 Gigabit SFP
    • 16K MAC Address Table
    • Backplane : 56Gbps
    • Dual Power Supplies for isolated 1600V DC(36V~75V) 
    • Dual Power Supplies for isolated ±4000 V (85V~265VAC/100V~370VDC)
    • Dual power supply terinal block for non-isolated power DC(12V~57V)
    • Terminal block for PoE power source(DC48V)
    • Various modules available incl. Gigabit/100M SFP ; Gigabit T ;PoE at/af Giga T(up to 30W@) ; 100MST/SC modules
    • FAN less design
  • 10KB Jumbo frame supported on all ports
  • User friendly UI, Auto topology drawing, topology demo, Complete CLI supported
  • IP v6/v4 supported
  • Enhanced G.8032 Ring protection in 20ms for single ring
    • Support various ring/chain topologies, including dynamic coupling ring
    • Enhanced G.8032 ring configuration with ease
    • Auto ring configuration(auto mode) for single ring
    • Ring covers multicast on different ports
  • DDM to support SFP diagnostic function***
    • Automatically convert the raw data into dB values for TX power/RX power, making it easier to measure the fiber distance
  • 256 groups MSTP over VLAN
  • VLAN
    • 4K 802.1Q Vlan, Port Based VLAN,GVRP**, QinQ*
  • Port Trunk with LACP 14 trunks with automatic link failover
  • LACP link aggregation to add bandwidth
  • QoS (Quality of Service)
    • Supports IEEE 802.1p CoS
    • Per port provides 8 priority queues
    • Port-base,Tag-base and TOS Priority
    • Strict priority and WRR
  • Security
    • SSL/SSH/INGRESS/EGRESS ACL L2/L3
    • Port Security: MAC address entries/Filter/MAC-Port binding
    • IP Security: IP address security management to prevent unauthorized intruder.
    • Management access control with priority
    • Login Security: IEEE802.1X/RADIUS
    • HTTPS for secure access to the web interface
  • Miss-wiring avoidance
    • LED indicator
    • Email, traps, or SMS notification
  • Repowered auto ring restore (node failure protection)
    • Ensure the switches in a ring to survive after power breakout is back
    • The status can be shown in NMS when each switch is back
  • IGMP v1,v2,v3 and Proxy for Multi Media Application; GMRP*
  • IGMP router port to select another Query mode and for reversed multicast video flow
  • SNTP, NTP supported
  • Supports IEEE802.1ab LLDP, Cisco CDP
  • DHCP server / client / DHCP Option 82 relay / DHCP Option 82 server for Port/Vlan based DHCP distribution
  • Mac based DHCP server to assign IP address that includes dumb switches in DHCP network
  • Bandwidth Control
    • Ingress Packet Filter and Egress Rate Limit
    • Broadcast/Multicast Packet Filter Control
  • System Event Log, Email alert, SMS(mobile text) and SNMP Trap for alarm support
  • Environmental sensor to detect temperature, voltage, current and watts that will send out SNMP traps , SMS and emails if there is abnormal events
  • TFTP/FTP Firmware upgrade/ InstaConfig** mass upgrade
  • Reset / Factory default button to restore factory setting
  • Watch dog design to reboot switch if CPU is found dead
  • Provides EFT protection ±4000 VDC for power line
  • Supports ±8000 VDC Ethernet ESD protection
  • 2 DI/DO and 1 relay contact alarm
  • Support USB dongle for automatic backup and edited restoration configuration
*Future Release
**Optional
***Optional DDM SFP required

SPECIFICATIONS

Hardware Specifications

IEEE Standards

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T Ethernet
IEEE802.3z Gigabit fiber
IEEE 802.3x Flow Control Capability
ANSI/IEEE 802.3 Auto-negotiation
IEEE 802.1Q VLAN
IEEE 802.1p Class of Service
IEEE 802.1X Access Control
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1s Multiple Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1x User Authentication (Radius)
IEEE 1588 Precision Time Protocol v2
IEEE 802.3at/af PoE

Switch Architecture

Back-plane (Switching Fabric): 56Gbps

Transfer Rate

14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Ethernet / Gigabit Fiber port

CPU

Marvell 800Mhz

RAM

256M Byte

Flash

128M Byte

Mac Address

16K MAC address table

Jumbo frame*

10KB on all ports  

Connectors

Max. 28 10/100/1000T RJ-45 with auto MDI/MDI-X function
Max 28 100M Mini-GBIC : SFP sockets
Max 28 1000M Mini-GBIC : SFP sockets
RS-232 console: Female DB-9
USB for automatic backup and edited restoration configuration

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green), Fault (Red) ,R.M (Green)                                       
Link/Activity (Green), Full duplex/collision(Yellow)), MINI GBIC (Link/Activity )(Green) 

Power Supply

IGS-5400-2P: 1 built-in power + 1 optional power
IPGS-5400-2P: 1 built-in power + 1 optional power + 1 PoE power

  1. VAC/VDC isolated 4000V 85V~265VAC/100~370VDC
  2. VDC isolated 1600V 36~75VDC
  3. 12V~57VDC
  4. PoE power input 45~57VDC (55V input is recommended for 802.3at 30W applications)(IPGS-5400-2P)

Power Consumption

Full load: 30W/ Unload: 13W

PoE Budget

Max. 720W with dual 48VDC input

Relay Alarm

Provides one relay output for port breakdown, power fail and alarm.
Alarm Relay current carry ability: 1A @ DC24V

DI/DO

2 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
Digital Output (DO): Open collector to 80 VDC, 50mA

Case Dimension

19” Metal case,IP-30; 440mm(W)x325mm(D)x44mm(H)

Operating Humidity

5%~95% (Non-condensing)

Operating Temperature

Standard: -20°C ~60°C
Extended temperature : -40°C ~75°C
PoE module : -20°C ~60°C

Storage Temperature

-40°C ~85°C

EMI

FCC Class A, CE EN61000-4-2 (ESD),
CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT),
CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS),
CE EN61000-4-8, CE EN61000-4-11,
CE EN55032 Class A, CE EN55024

MTBF

245,432hrs

Stability Testing

IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration), IEC60870-2-2, IEC60068-2-30

Warranty

5 years

Software Specifications

Management

SNMP v1 v2c, v3/ Web/Telnet/CLI Management

SNMP MIB

RFC 1215 Traps MIB,
RFC 1213 MIBII
RFC 1158 MIBII
RFC 1157 SNMP MIB,
RFC 1493 Bridge MIB,
RFC 1573 IF MIB
RFC 2674 VLAN MIB,
Partial RFC 1757 RMON,
RFC 2674 Q-Bridge MIB; Bridge MIB,
LLDP MIB*
RSTP MIB*
Private MIB

VLAN

Port based VLAN, up to 28 groups
IEEE802.1Q Tag VLAN
Static VLAN groups up to 256, Dynamic VLAN group up to 2048, VLAN ID from 1 to 4096
GVRP up to 256 groups**
Multicast VLAN registration*, QinQ*

Port Trunk with LACP

LACP Port Trunk: 8 Trunk groups/Maximum 24 trunk members with failover

LLDP

Support LLDP to allow switch to advise its identification and capability on the LAN

CDP

Cisco Discovery protocol for topology mapping

ITU G.8032

Support ITU G.8032 v2/2012 for Ring protection in less than 20ms for self-heal recovery (basic mode)
Support various ring/chain topologies
Includes dynamic coupling ring
Enhanced G.8032 ring configuration with ease
Ring covers multicast on different ports

User friendly UI
  1. Auto topology drawing
  2. Topology demo
  3. Auto configuration for G.8032*
  4. DDM threshold monitoring with dB values***
  5. Complete CLI supported

PoE Management
  1. PoE Detection to check if PD hangs then restart the PD
  2. PoE Scheduling to On/OFF PD upon routine time table
  3. Per-port PoE status including current, voltage, watt and temperature

Spanning Tree

Support IEEE802.1d Spanning Tree,IEEE802.1w Rapid Spanning Tree, IEEE 802.1s MSTP

Quality of Service

The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP

Class of Service

Support IEEE802.1p class of service, per port provides 8 priority queues

QoS by VLAN

Tagged QoS by VLAN for all devices in the network

Port Mirror

Support 3 mirroring types: “RX, TX and Both packet”

IGMP

Support IGMP snooping v1,v2,v3; Supports IGMP router port
1024 multicast groups and IGMP query; GMRP*

Static MAC-Port bridge

Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application

Bandwidth Control

Support ingress packet filter and egress packet limit.
The egress rate control supports all of packet type,  the limit rates are 0~100Mbps.
Ingress filter packet type combination rules are Broadcast/Multicast/Flooded Unicast packet, Broadcast/Multicast packet, Broadcast packet only and all types of packet. The packet filter rate can be set from 0 to 100Mbps
The packet filter rate can be set an accurate value through the pull-down menu for the ingress packet filter and the egress packet limit.

Network Security

Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder.
802.1X access control for port based and MAC based authentication/MAC-Port binding
Management access control with priority
Ingress/Egress ACL L2/L3
SSL/ SSH for Management
HTTPS for secure access to the web interface
TACACS+* for Authentication

Flow Control

Support Flow Control for Full-duplex and Back Pressure for Half-duplex

Protection
  1. Miss-wiring avoidance
  2. Repowered auto ring restore(node failure protection)
  3. Loop protection

System Log

Support System log record and remote system log server

SMTP, SMS

Supports SMTP Server and 8 e-mail accounts for receiving event alert; can send SMS text alert via mobile

SNMP Trap

Up to 10 trap stations; trap types including:

  1. Device cold start
  2. Authorization failure
  3. Port link up/link down
  4. DI/DO open/close
  5. Typology change(ITU ring)
  6. PoE ping failure
  7. Power failure
  8. Environmental abnormal

DHCP

Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based&VLAN based DHCP distribution (DHCP relay agent)

Mac based DHCP Server

Assign IP address by Mac that can include dumb switch in DHCP network

DNS

Provide DNS client feature and support Primary and Secondary DNS server.

SNTP

Support SNTP to synchronize system clock in Internet

RTC

Built-in real time clock to keep track of time always

Environmental Monitoring

Internal sensor to detect temperature, voltage and current and send SNMP traps, SMS and emails if any abnormal events

Factory reset button & watch dog design

Factory reset button to restore back to factory default settings.  Watch dog design can reboot switch automatically under certain circumstances

Firmware Update

Support TFTP /FTP firmware upgrade and restore/ InstaConfig upgrade

USB Configuration
backup and restore

Supports text editable configuration file for system quick installation to backup and restore
USB dongle for automatic back up and editable restore
*Future Release
**Optional
***Optional DDM SFP required

DIMENSION

ORDER INFORMATION

Note: the modules will be factory pre-installed.

P/N Model name Description
8380-130 IPGS-5400-2P-HV 4 Modular Slots L2 plus Industrial PoE Switch Chassis
w/1x isolated AC/DC 85~265VAC/100V~370VDC power supply + 1x dual power socket + 1x 48VDC PoE power input; -40°C to 75°C
8380-1301 IPGS-5400-2P-HV-E 4 Modular Slots L2 plus Industrial PoE Switch Chassis
w/1x isolated AC/DC 85~265VAC/100V~370VDC power supply + 1x dual power socket + 1x 48VDC PoE power input; -20°C to 60°C
8380-131 IPGS-5400-2P-LDC 4 Modular Slots L2 plus Industrial PoE Switch Chassis
w/1x isolated DC 36~75VDC power supply + 1x dual power socket + 1x 48VDC PoE power input; -20°C to 60°C
8380-1311 IPGS-5400-2P-LDC-E 4 Modular Slots L2 plus Industrial PoE Switch Chassis
w/1x isolated DC 36~75VDC power supply + 1x dual power socket + 1x 48VDC PoE power input; -40°C to 75°C
8380-136 IPGS-5400-2P-AC 4 Modular Slots L2 plus Industrial PoE Switch Chassis
w/1x isolated AC85~265VAC IEC320 power supply + 1x dual power socket + 1x 48VDC PoE power input; -20°C to 60°C
8380-1361 IPGS-5400-2P-AC-E 4 Modular Slots L2 plus Industrial PoE Switch Chassis
w/1x isolated AC85~265VAC IEC320 power supply + 1x dual power socket + 1x 48VDC PoE power input; -40°C to 75°C
8380-138 IPGS-5400-2P-DC 4 Modular Slots L2 plus Industrial PoE Switch Chassis
w/1x DC 12~57VDC power supply + 1x dual power socket + 1x 48VDC PoE power input; -20°C to 60°C
8380-1381 IPGS-5400-2P-DC-E 4 Modular Slots L2 plus Industrial PoE Switch Chassis
w/1x DC 12~57VDC power supply + 1x dual power socket + 1x 48VDC PoE power input; -40°C to 75°C


Modules for Slot 1-3

 
Note: the modules will be factory pre-installed.

P/N Model name Discription
8380-102 6x 100M-SC-MM Module 6x 100M-SC-MM 2KM Module; -40°C to 75°C
8380-103 6x 100M-SC-SM Module 6x 100M-SC-SM 30KM Module; -40°C to 75°C
8380-109 6x 100M-ST-MM Module 6x 100M-ST-MM 2KM Module; -40°C to 75°C
8380-110 6x 100M-ST-MM Module 6x 100M-ST-SM 30KM Module; -40°C to 75°C
8380-105 8x GIGA T Module 8x 10/100/1000T Module; -40°C to 75°C
8380-114 8x GIGA T-PoE at/af Module 8x 10/100/1000T PoE at/af Module; -40°C to 75°C
8380-106 8x SFP Module 8x Dual Speed SFP module for 100M SFP or Gigabit SFP; -40°C to 75°C
8380-107 4x GIGA T + 4x SFP Module 4x 10/100/1000T + 4 x 100/1000M Dual Speed SFP Module; -40°C to 75°C


Modules for Slot 4

 
Note: the modules will be factory pre-installed.

P/N Model name Discription
8380-115 4x SFP Module 4x Dual Speed SFP module for 100M SFP or Gigabit SFP; -40°C to 75°C


OPTIONAL ACCESSORIES - Power for System

Model name Description
EOTH000701 Isolation Power 85-265VAC, 100-370VDC 1.5A, 47-63HZ
EOTH000702 Isolation Power 36-75VDC, 2.5A
EOTH000703 Power 85-264VAC IEC320 socket, 1.5A , 47-63HZ
EOTH000704 Power Input Module 12-57VDC, 2.5A


OPTIONAL ACCESSORIES - DIN Rail Power for PoE

Model name Description
NDR-480 Series 480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-240 Series 240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-120 Series 120W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)
NDR-75 Series 75W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)


OPTIONAL ACCESSORIES - Mini GBIC (SFP)

Model name Description Model name Description
8330-162-V1 MINI GBIC 1000SX (LC/0.5KM) Transceiver 8330-187-V1 LTSFP-1000BX-20KM Transceiver (WDM 1550)
8330-163-V1 MINI GBIC 1000SX2 (LC/2KM) Transceiver 8330-180-V1 LTSFP-1000BX-40KM Transceiver (WDM 1310)
8330-165-V1 MINI GBIC 1000LX (LC/10KM) Transceiver 8330-182-V1 LTSFP-1000BX-40KM Transceiver (WDM 1550)
8340-0591-V1 MINI GBIC 1000LHX (LC/40KM) Transceiver 8330-181-V1 LTSFP-1000BX-60KM Transceiver (WDM 1310)
8330-166-V1 MINI GBIC 1000XD (LC/50KM) Transceiver 8330-183-V1 LTSFP-1000BX-60KM Transceiver (WDM 1550)
8330-169-V1 MINI GBIC 1000XD (LC/60KM) Transceiver 8330-184-V1 LTSFP-1000BX-80KM Transceiver (WDM 1490)
8330-167-V1 MINI GBIC 1000ZX (LC/80KM) Transceiver 8330-185-V1 LTSFP-1000BX-80KM Transceiver (WDM 1550)
8330-170-V1 MINI GBIC 1000EZX (120KM) Transceiver 8330-071-V1 125Mbps BiDi SFP 2KM (WDM 1310) Transceiver
8330-168-V1 MINI GBIC 10/100/1000T (100m) Transceiver 8330-072-V1 125Mbps BiDi SFP 2KM (WDM 1550) Transceiver
8330-060-V1 100Base FX 2KM, Multi-mode, LC Transceiver 8330-069-V1 125Mbps BiDi SFP 20KM (WDM 1310) Transceiver
8330-065-V1 100Base FX 5KM, Multi-mode, LC Transceiver 8330-068-V1 125Mbps BiDi SFP 20KM (WDM 1550) Transceiver
8330-061-V1 100Base LX 30KM, Single-mode, LC Transceiver 8330-080 125Mbps BiDi SFP 40KM (WDM 1310) Transceiver
8330-197-V1 1.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1310) 8330-082 125Mbps BiDi SFP 40KM (WDM 1550) Transceiver
8330-198-V1 1.25Gbps BiDi SFP 0.5KM Transceiver (WDM 1550) 8330-081 125Mbps BiDi SFP 60KM (WDM 1310) Transceiver
8330-195-V1 1.25Gbps BiDi SFP 2KM Transceiver (WDM 1310) 8330-083 125Mbps BiDi SFP 60KM (WDM 1550) Transceiver
8330-196-V1 1.25Gbps BiDi SFP 2KM Transceiver (WDM 1550) 8330-084 125Mbps BiDi SFP 80KM (WDM 1310) Transceiver
8330-188-V1 1.25Gbps BiDi SFP 10KM Transceiver (WDM 1310) 8330-085 125Mbps BiDi SFP 80KM (WDM 1550) Transceiver
8330-189-V1 1.25Gbps BiDi SFP 10KM Transceiver (WDM 1550) 8330-191-V1 Dual Speed SFP 100M/1000M-LX 10KM Transceiver
8330-186-V1 1.25Gbps BiDi SFP 20KM Transceiver (WDM 1310) All SFP P/N# ended with D are with DDM function
All SFP P/N# ended with D are with DDM function

2020 © Lantech Communications Australia Pty Ltd. ALL Rights Reserved. Privacy Policy | Terms of Service