Logo

IPMR-3004DF

Industrial Multifunction VPN Router Managed Ethernet switch w/up to 2 LTE 4G + 2 serial ports + 4 Gigabit Ethernet (incl. 4 PoE) + 2 WAN Dual Speed SFP w/ Load Balancing**, VPN, Storage**; 9~56VDC input

  • Up to 2 concurrent mobility for 3G/4G LTE Link&GPS(2L model/4 SIMs)
  • Built-in 4 Gigabit Ethernet managed switch including4 PoE at/af w/budget 80W
  • Federal Information Processing Standards (FIPS)-compliance**
  • Managed Switch functions cover port management, QOS, VLAN, multicast, redundant ring and security function
  • VPN router for Multi-site VPN, OpenVPN, L2TP, IPSec, PPTP**, L2 over GRE
  • Load Balancing support 8 mechanism
  • Optional EMMC Flash storage on-board**
  • Support NAT and Firewall
  • Support 2 RS422/485 ports with 2.5KV isolation or 2 RS232 ports
  • Dual isolated input voltage 9~60VDC (9~56VDC model)
  • Vehicle E-marking* certificate
  • Environmental monitoring for router inside info with voltage, current, temperature and total POE load; LTE graphic signal strength & TX/RX rate display
  • Editable login page of captive portal for hot-spot application
  • Dual image firmware



Datasheet   Hardware Manual   Web UI User's Manual
For latest firmware, please send request to support@lantechcom.com.au

OVERVIEW

Lantech IPMR-3004DF series is a next generation industrial multi-function VPN router w/up to 2x LTE modem + 4x Gigabit Ethernet ports incl. 4 PoE ports + 2 WAN Dual Speed SFP+ 2 serial ports that supports advanced function of VPN, Load-balancing**(Basic & Full package), EMMC Flash Storage**, Protocol gateway(Modbus), and LTE quad SIM fail-over for industrial applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.


Dual concurrent LTE design 4G/3G for load-balancing
With dual LTE module design (2L model), 4 SIM card slots, IPMR-3004DF can allow auto-swap, failover & failback between multiple service providers for real non-stop connection. With concurrent LTE modules, it can also allocate bandwidth by Load Balancing** with 8 schemes between multiple WANs. With one mobile LTE module (1L model), 2 SIM card slots, IPMR-3004DF provides redundant link between two service providers. Both GPS and Russian GLONASS systems are supported.


Optional EMMC Flash storage**
The optional EMMC flash storage on router can offer 8G/16G/32G capacity.


Load Balancing with 8 mechanisms for multi-WANs (premium license)
IPMR-3004DF supports Load Balancing** for LTE/WAN connections. There are eight schemes for Load Balancing function:


Pack

Algorithm

Description

Basic Package

Fixed

Manually route by traffic type through fixed WAN link.

Failover

Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link fail occurs. Once failover will not failback until link loss.

Priority

Routes connections through preferred WAN link as primary while others follow by. Ex. Wi-Fi  client>LTE>others 

Weighted Round-Robin

Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.

Custom Route

Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.

Full Package (incl. basic package)

Sticky Session*

Binding all connections in an application session to particular WAN link to ensure all connections in the session are routed to the same WAN link , that is suitable for security services like online payment etc.

Smallest Load*

Routes connections through the WAN link with highest free bandwidth ratio.
The ratio = 1 - (traffic load / the capability of a WAN link).
The traffic load could be defined by downstream, upstream or total traffic

Fastest*

Routes connections through the WAN link with lowest latency time.


2 port serial connection
It builds in 2 port serial connection for RS232, RS422, 485 in which RS422/485 has 2.5KV isolation protection.


Managed switch Function
W/ port managed functions, QOS, VLAN, Multicast, Redundant protection, security


VPN and firewall
Besides traditional VPN peer to peer tunneling, IPMR-3004DF support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe. It supports Multi-Site VPN, Open VPN, L2TP, IPsec L2 over GRE, NAT, and PPTP** for various VPN applications. The built-in Layer-4 firewall includes DoS**, IP address filter / Mac address filter* / TCP/UDP port number.


DIDO for alarm & email** notice; Event log; Remote Web/SMS** control
2 sets of DIDO function can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the IPMR-3004DF will immediately send email** and trap. When the router is at remote area with limited access, Web/SMS** control can help to get router status or remotely reboot by Web/SMS**.


Wide range input voltage from 9V-60VDC (9~56VDC Model); Built-in 4 port PoE at/af switch with 80W budget
The IPMR-3004DF is able to work from 9VDC to 60VDC (9~56VDC Model) for PoE at/af with PoE budget 80W that is particular good for vehicle, rail train, depot etc. application.


Environmental monitoring for inside router info& alerting; Graphic LTE signal strength and TX/RX rate display
The built-in environmental monitoring can detect router ambient temperature, voltage, current where can send the syslog, email** and SMS** alert when abnormal.


Ignition Sensing
Ignition sense allows you to delay power off the router with a designated time delay.


Built-in Managed Switch Function
Managed switch function is built-in and provides various L2+ functions for network access deployment. It delivers ports and PoE management, VLAN, QoS, multicast, redundant ring, and security functions.


Dual image firmware
It supports dual-image firmware to choose which one to start.


Ruggedized industrial design and FCC*,CE*& E-marking** certificate
The IPMR-3004DF is designed to meet with industrial network environment with IP 30 housing. It passed serious tests under extensive Industrial EMI and environmental vibration and shocks standards. With CE & FCC radio certification for LTE and E-marking certificate, the IPMR-3004DF is best for outdoor community, vehicle, process control automation etc application. For more usage flexibilities, IPMR-3004DF supports wide operating temperature from -20°C to 75°C & -40°C to 75°C (-E model)


*Future Release
**Optional

FEATURES

  • Built-in 4 Gigabit Ethernet ports
  • Managed Ethernet switch Function
  • 6 SMA type connectors for LTE & GPS
  • HTTP/HTTPS/Telnet/SSH & Administration access
  • Support IPv6** & IPv4 protocol
  • EMMC-FLASH storage**8/16/32G
  • Radius Authentication, EAP-MD5, EAP-TLS, EAP-TTLS, PEAP; SSID broadcast disable supported**
  • Support Multi-Site VPN for mesh tunneling as well as Open VPN, L2TP, IPsec L2 over GRE and PPTP** fro secured network connection
  • The built-in Layer-4 firewall includes DoS**, IP address filter / Mac address filter* / TCP/UDP port number.
  • Support SNMP*v1/v2c/v3
  • NAT/DMZ
  • Dual concurrent LTE 4G/3G design (2L model)for auto-swap/failover/failback between multiple ISPs for continuous service (four SIM card slots)  
  • One LTE 4G/3G w/ 2 SIM card design(1L model) for mobile redundancy
  • GPS/ GLONASS  (support by LTE module) connection
  • Fast roaming** (Optional ) between APs by Wireless Controller
  • Load Balancing** supports 8 mechanism between multiple WANs

Pack

Algorithm

Description

Basic Package

Fixed

Manually route by traffic type through fixed WAN link.

Failover

Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link fail occurs. Once failover will not failback until link loss.

Priority

Routes connections through preferred WAN link as primary while others follow by. Ex. Wi-Fi  client>LTE>others 

Weighted Round-Robin

Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.

Custom Route

Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.

Full Package (incl. basic package)

Sticky Session*

Binding all connections in an application session to particular WAN link to ensure all connections in the session are routed to the same WAN link , that is suitable for security services like online payment etc.

Smallest Load*

Routes connections through the WAN link with highest free bandwidth ratio.
The ratio = 1 - (traffic load / the capability of a WAN link).
The traffic load could be defined by downstream, upstream or total traffic

Fastest*

Routes connections through the WAN link with lowest latency time.


  • Built-in 2 x serial ports(RS232/RS422/485)
  • Serial port with 2.5KV isolation on RS422/485
  • Supports 2DI / 2DO (Digital Input / Output)
  • Event alerting by Syslog, SNMP Trap, Email**, SMS** text, Relay ; Permanent local log rotation / Maxi 1K records
  • Remote Web/SMS** control to get status or re-boot by Web or SMS**
  • Graphic LTE signal strength & TX/RX rate display
  • Support SNTP to synchronize system clock
  • Support LLDP discovery protocol
  • Support DHCP Server and Client
  • Built-in environmental monitoring for system input voltage, current and ambient temperature; Able to set alert when abnormal
  • Dual image firmware to choose which to start
  • Firmware upgradeable through TFTP/FTP/HTTP
  • Configuration backup and restoration
    • Supports text configuration file for system quick installation
    • USB port to upload/download configuration by USB dongle
  • Reset button for factory default mode
  • IP 30 housing for industrial environment
  • DIN-Rail and Wall-mount** installation
  • Operation temperature -20~75°C or -40~75°C(-E model)
*Future Release
**Optional

SPECIFICATIONS

Cellular Interface

Location Solutions

GPS, Glonass (EU/Americas)
GPS, Glonass, Beidou, Galileo (APAC model only)

Band Options

Asia-Pacific (APAC model)
LTE:
B1, B3, B5※, B7, B8, B18※, B19※, B21※, B28, B38 (TDD), B39※(TDD), B40 (TDD), B41※ (TDD)
DC-HSPA+/ HSPA+/ HSPA/ UMTS= B1, B5※, B6※, B8, B9※, B19※

Europe & North America (EUNA model)
LTE:
B1, B2※, B3, B4※, B5※, B7, B8, B12※, B13※, B20, B25※, B26※, B29※, B30※, B41※ (TDD)
DC-HSPA+/ HSPA+/ HSPA/ UMTS= B1, B2※, B3, B4※, B5※, B8

WorldWide (WW model)
LTE:
B1, B2※, B3, B4※, B5※, B7, B8, B9※, B12※, B13※, B18※, B19※, B20, B26※, B28, B29※, B30※, B32※, B41※ (TDD), B42※ (TDD), B43※(TDD), B46※ (TDD), B48※ (TDD), B66※

WCMDA= B1, B2※, B3※, B4※, B5※, B6※, B8, B9※, B19※


※Standard test of the following bands are not listed in EN 301 908-1 report:
(APAC not listed bands) LTE = B5, B18, B19, B21, B39, B41
(EUNA not listed bands) LTE = B2, B4, B5, B12, B13, B25, B26, B29, B30, B41 WCDMA = B2, B4, B5;
(WW not listed bands) LTE = B2, B4, B5, B9, B12, B13, B18, B19, B26, B29, B30, B32, B41, B42, B43, B46, B48, B66 WCDMA = B2, B3, B4, B5, B6, B9, B19

Data Rates – LTE

APAC & Australia (APAC model)
Downlink (Cat 6):
FDD: 300 Mbps
TDD: 222 Mbps
Uplink (Cat 6):
FDD: 50 Mbps
TDD: 26 Mbps

Americas & EMEA (EUNA model)
Downlink (Cat 6):
FDD: 300 Mbps
TDD: 222 Mbps
Uplink (Cat 6):
FDD: 50 Mbps
TDD: 26 Mbps

WorldWide (WW model)
Downlink:
Cat 12: 600 Mbps
Cat 9: 450 Mbps
Uplink:
Cat 13: 150 Mbps

Physical Ports & System

Connectors

10/100/1000T: 4x ports RJ 45
Dual Speed SFP port x 2ports
USB x 1
RS-232 connector: 1 x RJ 45
Serial connector : 2 DB9
SIM card slots : 4(2L) or 2(1L)
2L model SMA connector for LTE: 4 (female)
SMA connector for GPS: 2 (female)
1L model SMA connector for LTE: 2 (female)
SMA connector for GPS: 1 (female)
Power & P-Fail connector: 1 x 6-pole terminal block
DIDO : 1 x 5-pole terminal block

Serial Baud Rate

1000Kbps for RS232 ; 12Mbps for RS422/485

Serial Data Bits

5, 6, 7, 8

Serial Parity

odd, even, none, mark, space

Serial Stop Bits

1, 1.5, 2

RS-232

TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422

Tx+,Tx-, Rx+, Rx-,GND

RS-485 (2-wire)

Data+, Data-,GND

Isolation protection

RS422/485 2.5KV isolation; 8KV contact & 15KV air
RS232 8KV contact and 15KV air ESD
DIDO 3KV isolation
Input power 1.5KVA isolation

EMMC**

8G 16G 32G

DI/DO

2 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
2 Digital Output(DO): Open collector to 40 VDC, 200mA

LED Indicators

Power & System indicator

Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red) , Ring Master(Green), Storage(Green), Serial1/Serial2(Green) ,Ready(Green)

10/100/1000Base-T(X) port indicator

Link/Activity (Green), Speed (Yellow), PoE (Green)

SIM

Green for Link/Act

GPS

Green for Link/Act

Fault

Red: Ethernet link down or power down

Fault Contact

Relay

Relay output to carry capacity of 1A at 9~56VDCDC

Power

Input power

Single DC input, 9~60VDC

PoE Budget

80W

Power consumption (Typ.)

30.5 Watts

Physical Characteristic

Enclosure

IP 30 aluminum case

Dimension

74 (W) x 142 (D) x 152 (H) mm

Weight

900g

Environmental

Storage Temperature

-40oC ~ 85oC (-40oF ~ 185oF)

Operating Temperature

-20oC ~ 75oC (-4oF ~ 167oF)
-40oC ~ 75oC (-40oF ~ 167oF) for -E model

Operating Humidity

5% to 95% Non-condensing

Regulatory Approvals

Safety

EN 62368

EMC

FCC Part 15B Class A,
EN 55032: 2015,
EN 55024: 2010
IEC 61000-6-2,
IEC 61000-6-4

EMS

IEC 61000-4-2 (ESD),
IEC 61000-4-3 (RS),
IEC 61000-4-4 (EFT),
IEC 61000-4-5 (Surge),
IEC 61000-4-6 (CS),
IEC 61000-4-8 (PFMF)

Radio Frequency

EN 301 489-1,
EN 301 489-17,
EN 301 489-19,
EN 301 489-52
EN 301 908-1※,
EN 303 413,
EN 62311

Vehicle certificate

E13**
ITxPT compliant**

MTBF

NA

Warranty

5 years

Software

IPv6/4

Present

VPN

Multi-site VPN, Open VPN, PPTP**, L2TP, IPSec ,  L2 over GRE

Login Security

Supports IEEE802.1x** Authentication/RADIUS

Access Security

HTTP/HTTPS/Telnet/SSH & Administration; SNMP*v1/v2/v3 access for authentication via MD5/SHA(v3) and Encryption via DES/AES(v3)

Protocol

PPPoE Client,DHCP server/client, Adjustable MTU, Port forwarding (NAPT), DMZ; NAT, SNTP, Firewall(Firewall(DoS**; IP address filter / Mac address filter* /  TCP/UDP port name ),VRRP**, DDNS*

Management

SNMP*v1,v2c,v3/ Web/Telnet/CLI

Managed function

QOS, VLAN, Multicast, Redundant protection, security

Environmental Monitoring

System status for input voltage, current , ambient temperature to be shown in GUI and sent alerting if any abnormal status

Graphic signal display

Graphic LTE signal strength & TX/RX rate display

Timer

Built-in Real Time Clock to keep track of time always(RTC)

Discovery

IEEE 802.1ab Link Layer Discovery Protocal (LLDP)

SNMP trap

Device cold / warm start
Port link up / link down
DI/DO high / low

Remote Web/SMS** control

To reboot router by WebUI or SMS**

Maintenance

Firmware upgradeable through TFTP/FTP/HTTP

Configuration backup & restore

Supports text configuration file for system quick installation
USB port to upload/download configuration by USB dongle

Software - Load Balancing

8 schemes for multiple WAN(client mode)

Pack

Algorithm

Description

Basic Package

Fixed

Manually route by traffic type through fixed WAN link.

Failover

Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link failure occurs.

Priority

Routes connections through preferred WAN link while others stand-by. Sequentially activate other links if overflow occurs.

Weighted Round-Robin

Evenly distribute the traffic over all working WAN links in circular order according to the specified weights

Custom Route

Routing through the selected WAN for each specific traffic ex: TCP/UDP port number and IP address.

Full Package incl. Basic Package

Sticky Session*

Binding all connections in an application session to particular WAN link to ensure all connections in the session are routed to the same WAN link , that is suitable for security services like online payment etc.

Smallest Load*

Routes connections through the WAN link with highest free bandwidth ratio. The ratio = 1 - (traffic load / the capability of a WAN link). The traffic load could be defined by downstream, upstream or total traffic

Fastest*

Routes connections through the WAN link with lowest latency time.
*Future Release
**Optional

DIMENSION

ORDER INFORMATION

For -40~75C operational temperature model, the model name will add -E

P/N Model name Description
8692-001 IPMR-3004DF-2L-2S-9~56VDC-EUNA Industrial Dual LTE(Quad SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS232 serial ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; EU and US band ; dual isolated input 9~60VDC; -20~75C
8692-002 IPMR-3004DF-2L-2S-9~56VDC-APAC Industrial Dual LTE(Quad SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS232 serial ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; APAC band ; dual isolated input 9~60VDC; -20~75C
8692-003 IPMR-3004DF-2L-2S-9~56VDC-WW Industrial Dual LTE(Quad SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS232 serial ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; worldwide band ; dual isolated input 9~60VDC; -20~75C
8692-004 IPMR-3004DF-2L-2SA-9~56VDC-EUNA Industrial Dual LTE(Quad SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS422/485 serial isolated ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; EU and US band ; dual isolated input 9~60VDC; -20~75C
8692-005 IPMR-3004DF-2L-2SA-9~56VDC-APAC Industrial Dual LTE(Quad SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS422/485 serial isolated ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; APAC band ; dual isolated input 9~60VDC; -20~75C
8692-006 IPMR-3004DF-2L-2SA-9~56VDC-WW Industrial Dual LTE(Quad SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS422/485 serial isolated ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; worldwide band ; dual isolated input 9~60VDC; -20~75C
8692-007 IPMR-3004DF-1L-2S-9~56VDC-EUNA Industrial One LTE(Dual SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS232 serial ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; EU and US band ; dual isolated input 9~60VDC; -20~75C
8692-008 IPMR-3004DF-1L-2S-9~56VDC-APAC Industrial One LTE(Dual SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS232 serial ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; APAC band ; dual isolated input 9~60VDC; -20~75C
8692-009 IPMR-3004DF-1L-2S-9~56VDC-WW Industrial One LTE(Dual SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS232 serial ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; worldwide band ; dual isolated input 9~60VDC; -20~75C
8692-010 IPMR-3004DF-1L-2SA-9~56VDC-EUNA Industrial One LTE(Dual SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS422/485 serial isolated ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; EU and US band ; dual isolated input 9~60VDC; -20~75C
8692-011 IPMR-3004DF-1L-2SA-9~56VDC-APAC Industrial One LTE(Dual SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS422/485 serial isolated ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; APAC band ; dual isolated input 9~60VDC; -20~75C
8692-012 IPMR-3004DF-1L-2SA-9~56VDC-WW Industrial One LTE(Dual SIM) Load Balancing** Multifunction Router Managed Ethernet Switch w/ 2 RS422/485 serial isolated ports and 4 Giga ports and 2 WAN Dual Speed SFP incl.4 PoE; worldwide band ; dual isolated input 9~60VDC; -20~75C


EMMC Flash Storage

P/N Description
8850-113 8G
8850-114 16G
8850-115 32G


Software License

P/N Description
9000-101 LOAD BALANCING Basic Package
9000-102 LOAD BALANCING Full Package


OPTIONAL ACCESSORIES - Management System

P/N Model name Description
9000-121 InstaAir Cloud Based Fleet Management System for Routers ( View Datasheet )


OPTIONAL ACCESSORIES - LTE Antenna

Model name Description
ANT11000041 791-960/1710~2170/2500~2700MHZ, SMA plug, EU
ANT11000042 704-960/1710~2170MHZ, SMA plug, US


OPTIONAL ACCESSORIES - DIN Rail Power

Model name Description
NDR-480 Series 480W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-240 Series 240W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
NDR-120 Series 120W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)
NDR-75 Series 75W Single Output Industrial Din Rail Power; 90-264VAC / 127-370VDC Input Range; Cooling by free air convection; RoHS2 ; Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C; For 115VAC, please refer to derating curve on NDR-120 Series datasheet)


OPTIONAL ACCESSORIES - Mini GBIC (SFP)

Model name Description Model name Description
8330-162X MINI GBIC 1000SX (LC/0.5km) Transceiver 8330-186 LTSFP-1000BX-20KM Transceiver (WDM 1310)
8330-163X MINI GBIC 1000SX2 (LC/2km) Transceiver 8330-187 LTSFP-1000BX-20KM Transceiver (WDM 1550)
8330-165X MINI GBIC 1000LX (LC/10km) Transceiver 8330-180 LTSFP-1000BX-40KM Transceiver (WDM 1310)
8340-0591 MINI GBIC 1000LHX (LC/40km) Transceiver 8330-182 LTSFP-1000BX-40KM Transceiver (WDM 1550)
8330-166 MINI GBIC 1000XD (LC/50km) Transceiver 8330-181 LTSFP-1000BX-60KM Transceiver (WDM 1310)
8330-169 MINI GBIC 1000XD (LC/60km) Transceiver 8330-183 LTSFP-1000BX-60KM Transceiver (WDM 1550)
8330-167 MINI GBIC 1000ZX (LC/80km) Transceiver 8330-184 LTSFP-1000BX-80KM Transceiver (WDM 1490)
8330-170 MINI GBIC 1000EZX (120km) Transceiver 8330-185 LTSFP-1000BX-80KM Transceiver (WDM 1550)
8330-168 MINI GBIC 1000T (100m) Transceiver 8330-262 MINI GBIC 2.5G 850nm VCSEL (LC/0.3km) Transceiver
8330-188 LTSFP-1000BX-10KM Transceiver (WDM 1310) 8330-263 MINI GBIC 2.5G 1310nm FP (LC/2km) Transceiver
8330-189 LTSFP-1000BX-10KM Transceiver (WDM 1550) 8330-265 MINI GBIC 2.5G 1310nm DFB (LC/15km) Transceiver
All SFP P/N# ended with D are with DDM function

About Lantech

Lantech is an IRIS-certified company that offers a complete family of industrial networking products. Lantech products and solutions provide for the delivery of universal Ethernet services across various markets and applications. Learn More

Taiwan Quality

Lantech is dedicated to providing the best quality and service to our customers. We proudly provide 5 years warranty to our industrial products. Learn More

Contact Us

15 McCabe Street,
North Fremantle, WA 6159
Tel : +61 8 6558 0818
Email: sales@lantechcom.com.au
Product Inquiry Form

2020 © Lantech Communications Australia Pty Ltd. ALL Rights Reserved. Privacy Policy | Terms of Service