- ABOUT LANTECH
- PRODUCTS
Software Package
Hardened Ethernet Connections
- EN50155 10G Uplinks Managed Ethernet Switches
- EN50155 2.5G Uplinks Managed Ethernet Switches
- EN50155 Giga Uplinks Managed Ethernet Switches
- EN50155 Unmanaged Ethernet Switches
- EN50155 Multifunction 4G+WiFi Routers
- EN50155 IEC 61375 Ethernet Switches
- Industrial IEC 61850-3 PT Switches
- Industrial E-marking Switches & Routers
- Industrial DNV Type Switches
- Industrial Hazardous Switches
- Industrial Managed Switches
- Industrial 10G Switches
- Industrial 2.5G Switches
- Industrial Rackmount Switches
- Industrial PoE Solutions
- Industrial Unmanaged Switches
- Industrial Multifunction 4G+WiFi Routers
- Industrial Converter Series
- Industrial / Serial Devices
Software / Accessories
Naming Rule
- SOLUTIONS
- CASE STUDY
- SUPPORT
- CONTACT US
8 10/100TX + 4 1G/2.5G Copper w/8 PoE EN50155 OS3 Managed Ethernet Switch w/ Enhanced G.8032 Ring, PXE ; WVI input
- Total 8 10/100TX + 4 1G/2.5G Copper w/8 PoE
ports
- Advanced protection schemes to include the
protection against degraded situations, malicious behaviors
- Support IEEE802.3at/af up to 30W per port
- PoE management incl. Detection and Scheduling
- Enhanced G.8032 ring protection < 20ms for
single ring
- Supports enhanced mode and basic mode; Enhanced
G.8032 ring covers multicast packets; MSTP 8 MSTI /RSTP; support MRP ring
- Support PXE to verify switch firmware with the
latest or certain version on server
- Miss-wiring avoidance & node failure protection
- User friendly UI, including auto topology
drawing; Complete CLI
- Support LACP link aggregation, IGMP v3/router
port, MLD snooping, DHCP server & DHCP Option82; DHCP Snooping, Port based DHCP
distribution, Mac based DHCP server, QoS by VLAN, SSH v2/SSL, HTTPS, INGRESS ACL
L2/L3,TACACS+, QinQ
- Protocol based VLAN; IPv4 Subnet based VLAN
- Enhanced Environmental Monitoring for temp.,
actual input voltage, current & total power load
- Optional Smart bypass on 1G/2.5G ports in case
of power failure, CPU hang (Up to two pairs)
- IP54 Aluminum housing for best heat dissipation
and preventing moist ingress
- USB port to upload & download the configuration
file
- Optional L3Lite or IEC 61375-2-5 TBN features to
be upgradable
- Inrush current protection
- ITxPT compliant w/ ignition function**
- Dual power input 16.8V~137.5V with galvanic
isolation between input power, PoE and system
- Factory reset pin to restore to factory default
setting
- Wide range operation temperature:
-40~70C/-40~158F
Datasheet
Hardware Manual
For latest firmware and web UI user manual, please send request to support@lantechcom.com.au
OVERVIEW
Lantech TPES-L5408MGTA is a high performance OS3 switch with 8 10/100TX + 4 1G/2.5G Copper w/8 PoE 802.3af/at ports Ethernet which provides advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports enhanced mode with easy configuration. The comprehensive QoS, advanced security including INGRESS ACL L2/L3, TACACS+, SSH v2/SSL and Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port are supported and are also required in large network. It also supports10K Jumbo frames.
Up to 8 PoE at/af ports w/advanced PoE management
Compliant with 802.3af/at standard, the Lantech TPES-L5408MGTA being able to feed each PoE port up
to 30 Watt at each PoE port for various IP PD devices. Lantech TPES-L5408MGTA supports advanced PoE
management including PoE detection and scheduling. PoE detection can detect if the connected PD
hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine
time table. Each PoE ports can be Enabled/disabled, get the voltage, current, Watt, and temperature
info displayed on WebUI.
Miss-wiring avoidance, Node failure protection
The TPES-L5408MGTA also embedded several features for strong and reliable network protection in an
easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech
TPES-L5408MGTA being able to alert with the LED indicator and disable ring automatically. Node
failure protection ensures the Ethernet switches in a ring to survive after power breakout is back.
The status can be shown in NMS when each Ethernet switch is back. Loop protection is also available
to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop
connection.
Support PXE to verify switch firmware with the latest or certain
version
The switch can check its firmware version during booting time via PXE protocol. If switch finds any
newer version, it will upload automatically.
DHCP option 82 & Port based, Mac based DHCP, Option66, DHCP Snooping, IPv6 DHCP
server
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch); it
also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP
Snooping is supported. For the ending device which need to download file from TFTP server, DHCP
Option66 server can offer IP address of TFTP server to DHCP client. Basic IPv6 DHCP service can be
supported.
User friendly GUI, Auto topology drawing
The user-friendly UI, innovative auto topology drawing and topology demo makes TPES-L5408MGTA much
easier to get hands-on. The complete CLI enables professional engineer to configure setting by
command line.
Enhanced G.8032 ring, 8 MSTI MSTP; MRP ring
Lantech TPES-L5408MGTA features enhanced G.8032 ring which can be self-healed in less than 20ms for
single ring topology protection covering multicast packets. It also supports various ring topologies
that covers enhanced ring and basic ring by easy setup than others. It supports MSTP that allows
RSTP over VLAN for redundant links with 8 MSTI.
MRP (Media Redundancy Protocol) can be supported for industrial automation networks.
IGMPv3, GMRP, router port, MLD Snooping, static multicast forwarding and multicast Ring
protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead
of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port, MLD Snooping and
static multicast forwarding binding by ports for video surveillance application.
Built-in IEC 61375-3-4 ECN (Ethernet Consist Network) to work with IEC61375-2-5
TBN
Lantech OS3 Ethernet switches comply with IEC 61375-3-4 (ECN) standard. The support of Ethernet
Consist Network allows interconnection between end devices located in single consist of train and
interoperability with IEC61375-2-5 (TBN).
Enhanced Storm Control
Storm control prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast
storm on one of the physical interfaces and the detection is more precise and reaction is more
efficient.
Optional L3Lite/L3*/ETBN to be upgradable
Lantech OS3 are optional upgradable to L3 Lite/ L3* or ETBN communication protocols for future
expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter- VLAN
routing. Optional ETBN complies with IEC61375-2-5 ETBN for Train Backbone Network.
QinQ, QoS and GVRP supported
It supports the QinQ, QoS and GVRP for large VLAN segmentation.
Protocol based VLAN; Subnet based VLAN
The protocol-based VLAN processes traffic based on protocol.
It filters IP traffic from nearby end-stations using a particular protocol such as IP, IPX, ARP or
other Ethernet-types in a Hex value. Subnet based VLANs group traffics into logical VLANs based on
the source IP address and IP subnet.
The above features can help to build VLAN in the network mixed with managed and un-managed switch as
to define packets to which VLAN group based on protocol or subnet.
Editable configuration file; USB port for upload/download configuration
The configuration file of Lantech TPES-L5408MGTA can be exported and edited with word processor for
the following Ethernet switches to configure with ease.
The USB port can upload/download the configuration from/to USB dongle.
Event log & message; 2 DI + 2 DO; Factory default pin
TPES-L5408MGTA provides 2DI and 2DO. When disconnection of the specific port was detected; DO will
activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the
outside alarm and switch will send alert information to IP network with email and traps.
The factory reset pin can restore the setting back to factory default.
Enhanced environmental monitoring for Ethernet switch inside information
The enhanced environmental monitoring can detect switch overall temperature, actual input voltage
and current. It also can send the SNMP traps and email** when abnormal.
Optional Ignition function using rotary switches
With a 5-Pin rotary switch to trigger delay off into standby mode function. There will be three
switch modes set as different time span to delay off system off time.
Optional Smart bypass protection on dual 1G/2.5G copper ports**
The smart bypass relay is set to bypass the switch to the next one when power is off in order to
protect the network from crashing. Lantech bypass caters to remain in bypass mode until the switch
is completely booting up when power is back to avoid another network lost. Optional smart bypass (Up
to two pairs) can be activated when switch encounters power failure or CPU hang. (-BT/-BBT model)
Dual WVI input with max PoE budget and Inrush current protection
The TPES-L5408MGTA WVI model accept 16.8~137.5VDC dual input with galvanic protection and can feed
54V output for PoE feeding with 80W budget.
A voltage which can be minimal 0,5 Un nominal voltage (when Vin≧36V) and/or a voltage which can be
maximal 1,5 Un nominal voltage for more than 1000 consecutive ms (one second).
The inrush current on initial power up can be limited lower than 10 x nominal current and for less
than 1ms.
EN50155, EN45545-2, EN61373 compliance; High ESD protection
TPES-L5408MGTA passed serious tests under extensive Industrial EMI and Safety standards. With
EN45545-2 Fire & Smoke, EN50155 verification, the TPES-L5408MGTA is the best switch for railway
on-board/track side, vehicle, and mining applications. For more usage flexibilities, TPES-L5408MGTA
supports wide operating temperature from -40°C to 70°C. (85°C operation for 10min.)
*Future release
**Optional
FEATURES
- 8 10/100TX D-coded + 4 1G/2.5G Copper w/8 PoE 802.3af/at ports (Total 12 Ports Switch) to feed power up to 30W for active mode operation
- Dual WVI input (16.8V~137.5VDC) for PoE budget 80W
- Galvanic isolation from power input/Ethernet ports to system 1.5KV
- Back-plane (Switching Fabric): 21.6Gbps
- 16K MAC address table
- 10KB Jumbo frame
- PoE management including PoE detection and scheduling for PD (power devices)
- User friendly UI, auto topology drawing, topology demo, complete CLI for professional setting
- Enhanced G.8032 Ring protection in 20ms for single ring
- Support various ring/chain topologies, including enhanced ring and basic ring,
- Enhanced G.8032 ring configuration with ease
- Cover multicast and data packets protection
- Support train IP group address by multicast
- Supports IEEE 802.1p Class of Service, per port provides 8 priority queues Port base, Tag Base and Type of Service Priority
- IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP VLAN redundancy with 8 MSTI
- Subnet VLAN and protocol VLAN
- 4K 802.1Q VLAN, Port based VLAN, GVRP, QinQ, QoS
- Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info can be viewed via Web/ Console
- Support PXE to verify switch firmware with the latest or certain version
- DHCP server / client / DHCP Option 82 relay / DHCP Option 82 server; Port based DHCP server; DHCP Snooping; DHCP Option 66; basic IPv6 DHCP server
- Mac based DHCP server to assign IP address that includes dumb Ethernet switches in DHCP network
- Bandwidth Control
- Ingress packet filter and egress* rate limit
- Broadcast/multicast packet filter control
- Miss-wiring avoidance
- LED indicator
- Node failure protection
- Ensure the switches in a ring to survive after power breakout is back
- The status can be shown in NMS when each switch is back
- System Event Log, SMTP alert and SNMP Trap for alarm support
- Security
- SSL/SSH v2/INGRESS ACL L2/L3
- MAC address table: MAC address entries/Filter/static MAC-Port binding
- Remote Admin: IP address security management to prevent unauthorized intruder
- TACACS+
- Login Security: IEEE802.1X/RADIUS
- HTTPS for secure access to the web interface
- Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application
- IGMP router port for Multicast protection
- IGMPv1,v2,v3 with Query mode for multi media
- MLD Snooping for IPv6 Multicast stream
- Dual image firmware support
- Factory reset button to restore setting to factory default
- Enhanced environmental monitoring for system actual input voltage, current, ambient temperature, and total power load
- Supports 2DI/2DO (Digital Input/Digital Output)
- Optional Bypass protection (Up to two pairs) (-BT/-BBT model)
- Solid GigaT bypass
- Bypass failed switch caused by power failure, watchdog hanged in a bus structure
- Wait until switch is completely booting to swift back to normal mode
- Configuration backup and restoration
- Supports editable configuration file for system quick installation
- USB port for upload/download configuration file
- TFTP/HTTP firmware upgrade
- Wide operation temperature: -40C~70C/-40F~158F (85°C operation for 10min.)
- EN45545-2 Fire & Smoke, EN50155 and EN61373 shock/vibration compliance
- Built-in IEC 61375-3-4 ECN (Ethernet Consist Network) to work with IEC61375-2-5 TBN
- Diagnostic including Ping / ARP table / DDM information
- Enhanced Storm Control
- Optional L3Lite/L3*/ETBN to be upgradable
- Inrush current protection
- ITxPT compliant w/ ignition function
- IP54 aluminum housing with wall mount design
*Future release
**Optional
SPECIFICATIONS
Hardware Specifications
|
Standards |
IEEE802.3 10Base-T Ethernet |
|||||||||
|
Switch Architecture |
Back-plane (Switching Fabric): 21.6Gbps |
|||||||||
|
Mac Address |
16K MAC address table |
|||||||||
|
Jumbo frame |
10KB |
|||||||||
|
Connectors |
10/100TX: 8 x M12 4-pole D-coded with Auto MDI/MDI-X function |
|||||||||
|
Network Cable |
10Base-T: 2-pair STP Cat. 3, 4, 5/ 5E/ 6 cable |
|||||||||
|
LED |
Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); RM(Green) |
|||||||||
|
DI/DO |
2 Digital Input (DI): |
|||||||||
|
Operating Humidity |
5% ~ 95% (Non-condensing) |
|||||||||
|
Operating Temperature |
-40°C~70°C / -40°F~158°F (85°C operation for 10min.) |
|||||||||
|
Storage Temperature |
-40°C~85°C / -40°F~185°F |
|||||||||
|
Power Supply |
Dual DC input 16.8VDC~137.5VDC |
|||||||||
|
PoE Budget |
|
|||||||||
|
PoE pin assignment |
M12 port #1~#8 (-8 model) support IEEE 802.3 at/af End-point, Alternative A mode |
|||||||||
|
Power Consumption |
Max. 14.9W exclude PoE load |
|||||||||
|
Case Dimension |
IP54 model: Aluminum case |
|||||||||
|
Weight |
3.6kgs |
|||||||||
|
Installation |
Wall Mount |
|||||||||
|
EMI & EMS |
FCC Part 15 Class A, |
|||||||||
|
Verifications |
EN50155/EN50121-3-2/EN50121-4/IEC61373; |
|||||||||
|
Stability Testing |
EN61373 (Shock and Vibration) |
|||||||||
|
MTBF |
613,681hrs (standards: IEC 62380) |
|||||||||
|
Warranty |
5 years |
|||||||||
|
Bypass** |
Up to two pairs bypass module on 1G/2.5G Copper ports to pass to next switch in case of power failure and CPU hang |
Software Specifications
|
Management |
SNMP v1 v2c, v3/ Web/Telnet/CLI |
|
SNMP MIB |
RFC 1213 MIBII |
|
PoE Management |
PoE Detection to check if PD hangs then restart the PD |
|
Per Port PoE Status |
On/ Off, voltage, current, watts, temperature |
|
ITU G.8032 |
Support ITU G.8032 for Ring protection in less than 20ms for self-heal
recovery (single ring enhanced mode) |
|
User friendly UI |
|
|
Port Trunk with LACP |
LACP Port Trunk: 8 Trunk groups |
|
TTDP |
Standardized protocol to map train IP, define train routing, NAT and devices by physical or logical topology |
|
LLDP |
Supports LLDP to allow switch to advise its identification and capability on the LAN |
|
CDP |
Cisco Discovery Protocol for topology mapping |
|
Enhanced Environmental Monitoring |
System status for actual input voltage, current ambient temperature, and total power load to be shown in GUI and sent alerting if any abnormal status |
|
VLAN |
Port Based VLAN |
|
Spanning Tree |
Supports IEEE802.1d Spanning Tree** and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree 8 MSTI |
|
Quality of Service |
The quality of service determined by IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP |
|
Class of Service |
Support IEEE802.1p class of service, per port provides 8 priority queues |
|
Remote Admin |
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder |
|
Login Security |
Supports IEEE802.1X Authentication/RADIUS |
|
Port Mirror |
Support 3 mirroring types: “RX, TX and Both packet” |
|
Network Security |
Support 10 IP addresses that have permission to access the switch management
and to prevent unauthorized intruder. |
|
MLD Snooping |
Support IPv6 Multicast stream |
|
IGMP |
Support IGMP snooping v1, v2, v3; Supports IGMP static route; 1024 multicast groups; IGMP router port; IGMP query; GMRP |
|
Static multicast forwarding |
Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application |
|
Bandwidth Control |
Support ingress packet filter and egress* packet limit. |
|
Advanced protection schemes |
Protect against Storm Control, DHCP snooping, IP Source Guard, ARP Inspection, BPDU Guard, Small frame arrival rate, Protocol storm protection |
|
Flow Control |
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex |
|
System Log |
Supports System log record and remote system log server |
|
Protection |
|
|
SNMP Trap |
Up to 5 trap stations; trap types including:
|
|
PXE |
PXE to verify switch firmware with the latest or certain version |
|
DHCP |
Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based DHCP; DHCP Snooping; DHCP Option 66; basic IPv6 DHCP server |
|
Mac based DHCP Server |
Assign IP address by Mac that can include dumb switch in DHCP network |
|
DNS |
Provide DNS client feature and can set Primary and Secondary DNS server |
|
SNTP |
Supports NTP/SNTP to synchronize system clock in Internet |
|
Firmware Update |
Supports TFTP firmware update, TFTP backup and restore; HTTP firmware upgrade |
|
Enhanced Storm Control |
prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on one of the physical interfaces |
|
ECN |
Complies with IEC 61375-3-4 (ECN) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (TBN). |
|
Optional L3Lite/L3*/ETBN** |
Lantech OS3 are optional upgradable to L3 Lite/ L3* or ETBN communication
protocols for future expansion. The optional L3Lite includes editable
routing table, VRRP, Router-on-a-stick, Inter- VLAN routing. Optional ETBN
complies with IEC61375-2-5 ETBN for Train Backbone Network. |
|
Configuration |
Supports editable configuration file for system quick installation; Support factory reset button to restore all settings back to factory default; |
|
Diagnostic |
Support Ping, ARP table and DDM information |
|
Dual Image Firmware |
Support dual image firmware function |
*Future release
**Optional
DIMENSION
ORDER INFORMATION
All model packages include M12 caps and wall mount bracket. All standard models are non-coating, optional coating models are available with –C model name. For optional bypass add –BT (one pair); -BBT (two pairs) to end of model names.
| P/N | Model name | Description |
|---|---|---|
| 8361-538 | TPES-L5408MGTA-8-54-WVI | 8 10/100TX + 4 1G/2.5G Copper M12 X-coded; w/8 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP54 housing |
| 8361-5383 | TPES-L5408MGTA-8-54-WVI-IGN | 8 10/100TX + 4 1G/2.5G Copper M12 X-coded; w/8 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP54 housing w/ignition function |
| 8361-5381 | TPES-L5408MGTA-8-54-WVI-BT | 8 10/100TX + 4 1G/2.5G Copper M12 X-coded; w/8 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP54 housing w/ galvanic isolation; one-pair copper bypass |
| 8361-5382 | TPES-L5408MGTA-8-54-WVI-BBT | 8 10/100TX + 4 1G/2.5G Copper M12 X-coded; w/8 PoE at/af EN50155 OS3 PoE Managed Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP54 housing w/ galvanic isolation; two-pairs copper bypass |
OPTIONAL ACCESSORIES - Software package
| P/N | Model name | Description |
|---|---|---|
| 9000-114 | OS3 – L3L | OS3 software platform with Layer 3 Lite functions (please check Lantech software data sheet for details) |
| 9000-115 | OS3 – IEC61375-2-5 | OS3 software platform with IEC-61375-2-5 ETBN (Ethernet Train Backbone Networks) functions incl. L3L (please check Lantech software data sheet for details) |
| 9000-116 | OS3 – L3* | OS3 software platform with Layer 3 functions incl. IEC61375-2-5 and L3L (please check Lantech software data sheet for details) |
OPTIONAL ACCESSORIES - Connector
| Model name | Description |
|---|---|
| ECONM12-04A(F)-C-180 | 4 pin M12 (Female) A-coded 180 degree crimp type connector for power supply |
| ECONM12-08A(M)-180 | 8 pin M12 (Male) A-coded 180 degree crimp type connector for reset/console/USB |
| ECONM12-05A(M)-C-180 | 5 pin M12 (Male) A-coded 180 degree crimp type connector for DI/DO |
| ECONM12-08X(M)-SPEEDCON | 8 pin M12 (Male) X-coded 180 degree crimp type connector for data, Ethernet CAT6A (10G), shielded, SPEEDCON |
| ECONM12-04D(M)-C-180 | 4 pin M12 (Male) D-coded 180 degree crimp type connector for data |
OPTIONAL ACCESSORIES - Cable
| Model name | Description |
|---|---|
| ECONM12-4P(F)1.5M CABLE | 4 pin M12 (Female) A-coded 90 degree cable for power supply, 150cm |
| ECONM12-08M2-CONSOLE | 8 pin M12 (Male) A-coded 180 degree to RS232 cable for console, 150cm |
| ECABM12X83MSTP | 8 pin M12 (Male) X-coded 180 degree RJ45 STP cable for data, shielded, 300cm |
| ECAB124030MJS | 4 pin M12 (Male) D-coded 180 degree RJ45 STP cable for data, 300cm |
OPTIONAL ACCESSORIES - Others
| Model name | Description |
|---|---|
| USB adapter (8850-102) | 8 pin M12 (Male) A-coded 180 degree M12 to USB 2.0 interface adapter, 8cm |
