Datasheet
Hardware Manual
For latest firmware and web UI user manual, please send request to sales@lantechcom.com.au
Lantech TPES-L6216XT is a high performance OS3 Ethernet switch with 8 10/100TX + 2 1G/2.5G/5G/10G Copper w/8/10 (incl.8 copper + 2 uplink 10GT copper) PoE 802.3af/at ports which provides advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports enhanced mode with easy configuration. The comprehensive QoS, advanced security including INGRESS/EGRESS* ACL L2/L3, TACACS+, SSH/SSL and Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port are supported and also required in large network. It also supports10K Jumbo frames.
Up to 8/10/16 PoE at/af ports w/advanced PoE management
Compliant with 802.3af/at standard, the Lantech TPES-L6216XT is able to feed each PoE port up to 30 Watt at each PoE port for various IP PD devices. Lantech TPES-L6216XT supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Each PoE ports can be Enabled/disabled, get the voltage, current, Watt, and temperature info displayed on WebUI.
Dual WV isolated input with max PoE budget and Inrush current protection
The TPES-L6216XT WVI model accepts 16.8~137.5VDC dual isolated input with galvanic protection and can feed 54V output for PoE feeding with 80W budget.
The inrush current on initial power up can be limited lower than 10 x nominal current and for less than 1ms.
Miss-wiring avoidance, node failure protection, Loop protection
The TPES-L6216XT also embedded several features for strong and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech TPES-L6216XT is able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
Support PXE to verify switch firmware with the latest or certain version
The switch can check its firmware version during booting time via PXE protocol. If switch finds any newer version, it will upload automatically.
DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch), it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application. Optional IPv6 address resolution for basic DHCP service can be supported.
User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes TPES-L6216XT much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.
Built-in IEC 61375-3-4 ECN* (Ethernet Consist Network) to work with IEC61375-2-5 TBN
Lantech OS3 and OS4 Ethernet switches comply with IEC 61375-3-4 (ECN*) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (TBN).
Optional L3Lite or TBN features to be upgradable
Lantech OS3 and OS4 are optional upgradable to L3 Lite or TBN communication protocols for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter- VLAN routing. Optional TBN complies with IEC61375-2-5 TBN for Train Backbone Network.
Enhanced G.8032 ring, MSTP 8 MSTI; MRP ring and GVRP supported
Lantech TPES-L6216XT features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring by easy setup than others. It supports MSTP that allows RSTP over VLAN for redundant links with 8 MSTI.
MRP (Media Redundancy Protocol) can be supported for industrial automation networks.
Protocol based VLAN; Subnet based VLAN
The protocol-based VLAN processes traffic based on protocol. It filters IP traffic from nearby end-stations using a particular protocol such as IP, IPX, ARP or other Ethernet-types in a Hex value. Subnet based VLANs group traffics into logical VLANs based on the source IP address and IP subnet. The above features can help to build VLAN in the network mixed with managed and un-managed switch as to define packets to which VLAN group based on protocol or subnet.
IGMPv3, GMRP, router port, MLD Snooping, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port, MLD snooping and static multicast forwarding binding by ports for video surveillance application.
Editable configuration file; USB port for upload/download configuration
The configuration file of Lantech TPES-L6216XT can be exported and edited with word processor for the following switches to configure with ease.
The USB port can upload/download the configuration from/to USB dongle.
Event log & message; 2 DI + 2DO; Factory default pin
TPES-L6216XT provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the outside alarm and switch will send alert information to IP network with email and traps.
The factory reset pin can restore the setting back to factory default.
Environmental monitoring for switch inside information
The environmental monitoring can detect switch overall temperature, total power load, actual input voltage and current. It also can send the SNMP traps alert when abnormal.
Optional smart bypass protection on dual 10G ports**
The bypass relay is set to bypass the switch to the next one when power is off to prevent network disruption. Lantech bypass caters to remain in bypass mode until the switch is completely booting up when power is back to avoid another network lost. Optional smart bypass (one pair) can be activated when switch encounters power failure or watch dog hang.
EN50155, EN45545-2; EN61373 compliance; High ESD protection
TPES-L6216XFT passed serious tests under extensive Industrial EMI and Safety standards. With EN45545-2 Fire & Smoke and EN50155 verification, the TPES-L6216XFT is best switch for railway on-board/track side, vehicle and mining applications. For more usage flexibilities, TPES-L6216XFT supports wide operating temperature from -40°C to 70°C.
Standards |
IEEE802.3 10Base-T Ethernet |
Switch Architecture |
Back-plane (Switching Fabric): 43.2Gbps |
Mac Address |
16K MAC address table |
Jumbo frame |
10KB |
Connectors |
10/100TX: 16 x M12 4-pole D-coded with Auto MDI/MDI-X function |
Network Cable |
1000Base-T: 4-pair STP Cat5E/6 cable; |
LED |
Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); RM(Green) |
DI/DO |
2 Digital Input (DI) : |
Operating Humidity |
5% ~ 95% (Non-condensing) |
Operating Temperature |
-40°C~70°C / -40°F~158°F (EN50155 T3 compliant) |
Storage Temperature |
-40°C~85°C / -40°F~185°F |
Power Supply |
Dual DC isolated input, 16.8VDC~137.5VDC |
PoE Budget |
80W |
PoE pin assignment |
M12 port #1~#8/16 (-8/-16 model) ; #17~#18 (-10 model) ; support IEEE 802.3at/af End-point ; Alternative A mode |
Power Consumption |
max. 37.4W exclude PoE load |
Dimensions |
IP54 model: Aluminum case |
Weight |
4.8kgs |
Installation |
Wall Mount Design |
EMI & EMS |
FCC Part 15 Class A, |
Verifications |
EN50155/EN50121-3-2/EN50121-4; |
Stability Testing |
EN61373 (Shock and Vibration) |
MTBF |
TBC (standards: IEC 62830) |
Warranty |
5 years |
Bypass** |
One pair Bypass module on 10GT ports to pass to next switch in case of power failure and watch dog fail |
Management |
SNMP v1 v2c, v3/ Web/Telnet/CLI |
SNMP MIB |
RFC 1213 MIBII |
ITU G.8032 |
Support ITU G.8032 for Ring protection in less than 20ms for self-heal recovery (single ring enhanced mode) |
PoE Management |
PoE Detection to check if PD hangs then restart the PD |
Per Port PoE Status |
On/ Off, voltage, current, watts, temperature |
User friendly UI |
|
Port Trunk with LACP |
LACP Port Trunk: 8 Trunk groups |
LLDP |
Supports LLDP to allow switch to advise its identification and capability on the LAN |
CDP |
Cisco Discovery Protocol for topology mapping |
Environmental Monitoring |
System status for actual input voltage, current , total power load and ambient temperature to be shown in GUI and sent alerting if any abnormal status |
VLAN |
Port Based VLAN |
IPv6/4 |
Present |
Spanning Tree |
Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree 8 MSTI |
Quality of Service |
The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP |
Class of Service |
Support IEEE802.1p class of service, per port provides 8 priority queues |
Remote Admin |
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder |
Login Security |
Supports IEEE802.1X Authentication/RADIUS |
Port Mirror |
Support 3 mirroring types: “RX, TX and Both packet” |
Network Security |
Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. |
MLD Snooping |
Support IPv6 Multicast stream |
IGMP |
Support IGMP snooping v1,v2,v3; Supports IGMP static route; 1024 multicast groups; IGMP router port ; IGMP query; GMRP |
Static multicast forwarding |
Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application |
Bandwidth Control |
Support ingress packet filter and egress* packet limit. |
Flow Control |
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex |
System Log |
Supports System log record and remote system log server |
Protection |
|
SNMP Trap |
Up to 5 trap stations; trap types including:
|
PXE |
PXE to verify switch firmware with the latest or certain version |
DHCP |
Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based DHCP ; DHCP Option 66 ; IPv6 address resolution for basic DHCP server |
Mac based DHCP Server |
Assign IP address by Mac in DHCP network |
DNS |
Provide DNS client feature and can set Primary and Secondary DNS server |
NTP/SNTP |
Supports NTP/SNTP to synchronize system clock in Internet |
Firmware Update |
Supports TFTP firmware update, TFTP backup and restore; HTTP firmware upgrade |
Configuration |
Supports editable configuration file for system quick installation; Support factory reset ping to restore all settings back to factory default |
ECN* |
Complies with IEC 61375-3-4 (ECN*) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (TBN). |
L3Lite/TBN* |
Lantech OS3 and OS4 are optional upgradable to L3 Lite or TBN communication protocols for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter- VLAN routing. Optional TBN complies with IEC61375-2-5 TBN for Train Backbone Network. |
Diagnostic |
Support Ping, ARP table and DDM information |
Dual Image Firmware |
Support dual image firmware function |
P/N | Model name | Description |
---|---|---|
8361-532 | TPES-L6216XT-8-54-WVI | 16 10/100TX + 2 1G/2.5G/5G/10G Copper M12 X-coded w/8 PoE 802.3at/af EN50155 OS3 Managed PoE Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP54 housing w/ galvanic isolation |
8361-5322 | TPES-L6216XT-10-54-WVI | 16 10/100TX + 2 1G/2.5G/5G/10G Copper M12 X-coded w/10 PoE 802.3at/af EN50155 OS3 Managed PoE Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP54 housing w/ galvanic isolation |
8361-5321 | TPES-L6216XT-16-54-WVI | 16 10/100TX + 2 1G/2.5G/5G/10G Copper M12 X-coded w/16 PoE 802.3at/af EN50155 OS3 Managed PoE Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP54 housing w/ galvanic isolation |
P/N | Model name | Description |
---|---|---|
9000-114 | OS3 – L3L | OS3 software platform with Layer 3 Lite functions (please check Lantech software data sheet for details) |
9000-115 | OS3 – IEC61375-2-5 | OS3 software platform with IEC-61375-2-5 ETBN (Ethernet Train Backbone Networks) function (please check Lantech software data sheet for details) |
9000-116 | OS3 – L3 | OS3 software platform with Layer 3 functions (please check Lantech software data sheet for details) |
Model name | Description |
---|---|
ECABM12X83MSTP | 8 Pin M12 X-coded RJ45 Male 3 METER, STP CABLE w/ Shielding |
ECONM12-4P(F)1.5CM CABLE | 4 pin M12 power cable 90 degree angle, 150cm |
ECONM12-5P(M)-W-180 | M12 5P(Male) 180 Degree Wire Type Connector (DI/DO) |
ECAB124030MJS | 4 Pin M12 RJ45 Male 3 Meters; STP Cable |
USB adapter | M12 to USB 2.0 interface adapter |
2020 © Lantech Communications Australia Pty Ltd. ALL Rights Reserved. Privacy Policy | Terms of Service