Datasheet
Hardware Manual
For latest firmware and web UI user manual, please send request to support@lantechcom.com.au
Lantech TPES-R6616XT is a high performance OS4 Ethernet switch with 16 10/100TX + 6 10G Copper w/8/16 or w/10/12 PoE (incl.8 copper + 2/4 uplink 10GT copper) 802.3af/at ports which provides advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports enhanced mode with easy configuration. The comprehensive QoS, advanced security including INGRESS ACL L2/L3, TACACS+, SSH v2/SSL and Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port are supported and also required in large network. It also supports10K Jumbo frames.
Up to 8/10/12/16(at) PoE at/af ports w/advanced PoE management
Compliant with 802.3af/at standard, the Lantech TPES-R6616XT is able to feed each PoE port up to 30 Watt at each PoE port for various IP PD devices. Lantech TPES-R6616XT supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Each PoE port can be enabled/disabled, get the voltage, current, Watt, and temperature info displayed on WebUI.
Dual WV input with max PoE budget and Inrush current protection
The TPES-R6616XT WVI model accepts 16.8~137.5VDC dual input with galvanic protection and can feed 54V output for PoE feeding with 80W budget. A voltage which can be minimal 0,5 Un nominal voltage (when Vin≧36V) and/or a voltage which can be maximal 1,5 Un nominal voltage for more than 1000 consecutive ms (one second).
The inrush current on initial power up can be limited lower than 10 x nominal current and for less than 1ms.
Miss-wiring avoidance, Loop protection, Node failure protection
The TPES-R6616XT also embedded several features for strong and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech TPES-R6616XT is able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. This feature prevents the broken ring and keep ring alive without any re-configuration needed. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.
Support PXE to verify switch firmware with the latest or certain version
The switch can check its firmware version during booting time via PXE protocol. If switch finds any newer version, it will upload automatically.
DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch) , it also can assign IP address by port for multiple switches with single DHCP option82 server. For the ending device which need to download file from TFTP server, DHCP Option66 server can offer IP address of TFTP server to DHCP client. Basic IPv6 DHCP service can be supported.
User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes TPES-R6616XT much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.
Built-in IEC 61375-3-4 ECN (Ethernet Consist Network) to work with IEC61375-2-5 ETBN
Lantech OS4 Ethernet switches comply with IEC 61375-3-4 (ECN) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (ETBN).
Optional L3Lite/L3/ETBN to be upgradable
Lantech OS4 are optional upgradable to L3 Lite/ L3 or ETBN communication protocols for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter- VLAN routing. Optional ETBN complies with IEC61375-2-5 ETBN for Train Backbone Network.
Enhanced G.8032 ring, MSTP 8 MSTI; MRP ring and GVRP supported
Lantech TPES-R6616XT features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring by easy setup than others. It supports MSTP that allows RSTP over VLAN for redundant links with 8 MSTI. MRP (Media Redundancy Protocol) can be supported for industrial automation networks.
Protocol based VLAN; Subnet based VLAN
The protocol-based VLAN processes traffic based on protocol. It filters IP traffic from nearby end-stations using a particular protocol such as IP, IPX, ARP or other Ethernet-types in a Hex value. Subnet based VLANs group traffics into logical VLANs based on the source IP address and IP subnet. The above features can help to build VLAN in the network mixed with managed and un-managed switch as to define packets to which VLAN group based on protocol or subnet.
QinQ, QoS and GVRP supported
It supports the QinQ, QoS, GVRP for large VLAN segmentation.
IGMPv3, GMRP, router port, MLD Snooping, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port, MLD snooping and static multicast forwarding binding by ports for video surveillance application.
Enhanced Storm Control
Storm control prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on one of the physical interfaces and the detection is more precise and reaction is more efficient.
Editable configuration file; USB port for upload/download configuration
The configuration file of Lantech TPES-R6616XT can be exported and edited with word processor for the following switches to configure with ease.
The USB port can upload/download the configuration from/to USB dongle.
Event log & message; 2 DI + 2DO; Factory default pin
TPES-R6616XT provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the outside alarm and switch will send alert information to IP network with email and traps.
The factory reset pin can restore the setting back to factory default.
Enhanced Environmental monitoring for Ethernet switch inside information
The enhanced environmental monitoring can detect switch overall temperature, actual input voltage and current. It also can send the SNMP traps and email** when abnormal.
Optional Smart bypass protection on 10G copper ports** (up to two pairs)
The bypass relay is set to bypass the switch to the next one when power is off to prevent network disruption. Lantech bypass caters to remain in bypass mode until the switch is completely booting up when power is back to avoid another network lost. Optional smart bypass (one pair and two pairs) can be activated when switch encounters power failure or CPU fail. (-BT/-BBT model)
EN50155, EN45545-2; EN61373 compliance; High ESD protection
TPES-R6616XFT passed serious tests under extensive Industrial EMI and Safety standards. With EN45545-2 Fire & Smoke and EN50155 verification, the TPES-R6616XFT is best switch for railway on-board/track side, vehicle and mining applications. For more usage flexibilities, TPES-R6616XFT supports wide operating temperature from -40°C to 70°C. (85°C operation for 10min.)
Standards |
IEEE802.3 10Base-T Ethernet |
|||||||||
Switch Architecture |
Back-plane (Switching Fabric): 123.2Gbps |
|||||||||
Mac Address |
16K MAC address table |
|||||||||
Jumbo frame |
10KB |
|||||||||
Connectors |
10/100T: 16 x M12 4-pole D-coded with Auto MDI/MDI-X function |
|||||||||
Network Cable |
1000Base-T: 4-pair STP Cat5E/6 cable; |
|||||||||
LED |
Per unit: Power 1 (Green), Power 2 (Green), FAULT (Red); RM(Green) |
|||||||||
DI/DO |
2 Digital Input (DI) : |
|||||||||
Operating Humidity |
5% ~ 95% (Non-condensing) |
|||||||||
Operating Temperature |
-40°C~70°C / -40°F~158°F (85°C operation for 10min.) |
|||||||||
Storage Temperature |
-40°C~85°C / -40°F~185°F |
|||||||||
Power Supply |
Dual DC input, 16.8VDC~137.5VDC |
|||||||||
PoE Budget |
|
|||||||||
PoE pin assignment |
M12 port #1~#8/16 (-8/-16 model); #19~#20 (-10/-12 model) ; support IEEE 802.3at/af End-point, Alternative A mode |
|||||||||
Power Consumption |
max. 47.5W exclude PoE load |
|||||||||
Dimensions |
IP21 model: Aluminum case |
|||||||||
Weight |
5.15kgs |
|||||||||
Installation |
Wall Mount Design |
|||||||||
EMI & EMS |
FCC Part 15 Class A, |
|||||||||
Verifications |
EN50155/EN50121-3-2; |
|||||||||
Stability Testing |
EN61373 (Shock and Vibration) |
|||||||||
MTBF |
347,281 Hrs (standards: IEC 62380) |
|||||||||
Warranty |
5 years |
|||||||||
Bypass** |
Up to two pairs Bypass module on 10GT ports to pass to next switch in case of power failure and CPU fail |
Management |
SNMP v1 v2c, v3/ Web/Telnet/CLI |
SNMP MIB |
RFC 1213 MIBII |
ITU G.8032 |
Support ITU G.8032 for Ring protection in less than 20ms for self-heal recovery (single ring enhanced mode) |
PoE Management |
PoE Detection to check if PD hangs then restart the PD |
Per Port PoE Status |
On/ Off, voltage, current, watts, temperature |
User friendly UI |
|
Port Trunk with LACP |
LACP Port Trunk: 8 Trunk groups |
LLDP |
Supports LLDP to allow switch to advise its identification and capability on the LAN |
CDP |
Cisco Discovery Protocol for topology mapping |
Enhanced Environmental Monitoring |
System status for actual input voltage, current, total power load and ambient temperature to be shown in GUI and sent alerting if any abnormal status |
VLAN |
Port Based VLAN |
Spanning Tree |
Supports IEEE802.1d Spanning Tree and IEEE802.1w Rapid Spanning Tree, IEEE802.1s Multiple Spanning Tree 8 MSTI |
Quality of Service |
The quality of service determined by port, Tag and IPv4 Type of service, IPv4 Differentiated Services Code Points - DSCP |
Class of Service |
Support IEEE802.1p class of service, per port provides 8 priority queues |
Remote Admin |
Supports 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder |
Login Security |
Supports IEEE802.1X Authentication/RADIUS |
Port Mirror |
Support 3 mirroring types: “RX, TX and Both packet” |
Network Security |
Support 10 IP addresses that have permission to access the switch management and to prevent unauthorized intruder. |
IGMP |
Support IGMP snooping v1,v2,v3; Supports 1024 multicast groups; IGMP router port ; IGMP query; GMRP |
MLD Snooping |
Support IPv6 Multicast stream |
Static multicast forwarding |
Static multicast forwarding forward reversed IGMP flow with multicast packets binding with ports for IP surveillance application |
Bandwidth Control |
Support ingress packet filter and* packet limit. |
Flow Control |
Supports Flow Control for Full-duplex and Back Pressure for Half-duplex |
System Log |
Supports System log record and remote system log server |
Protection |
|
SNMP Trap |
Up to 5 trap stations; trap types including:
|
PXE |
PXE to verify switch firmware with the latest or certain version |
DHCP |
Provide DHCP Client/ DHCP Server/DHCP Option 82/Port based DHCP; DHCP Option 66; basic IPv6 DHCP server |
Mac based DHCP Server |
Assign IP address by Mac in DHCP network |
DNS |
Provide DNS client feature and can set Primary and Secondary DNS server |
NTP/SNTP |
Supports NTP/SNTP to synchronize system clock in Internet |
Firmware Update |
Supports TFTP firmware update, TFTP backup and restore; HTTP firmware upgrade |
Configuration |
Supports editable configuration file for system quick installation; Support factory reset ping to restore all settings back to factory default; |
ECN |
Complies with IEC 61375-3-4 (ECN) standard. The support of Ethernet Consist Network allows interconnection between end devices located in single consist of train and interoperability with IEC61375-2-5 (ETBN). |
L3Lite/L3/ETBN** |
Lantech OS4 are optional upgradable to L3 Lite/ L3 or ETBN communication protocols for future expansion. The optional L3Lite includes editable routing table, VRRP, Router-on-a-stick, Inter- VLAN routing. Optional ETBN complies with IEC61375-2-5 ETBN for Train Backbone Network. |
Diagnostic |
Support Ping, ARP table and DDM information |
Dual Image Firmware |
Support dual image firmware function |
P/N | Model name | Description |
---|---|---|
8361-5192 | TPES-R6616XT-8-21-WVI | 16 10/100TX + 6 1G/2.5G/5G/10G Copper M12 X-coded w/8 PoE 802.3at/af EN50155 OS4 Managed PoE Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP21 housing w/ galvanic isolation |
8361-519 | TPES-R6616XT-10-21-WVI | 16 10/100TX + 6 1G/2.5G/5G/10G Copper M12 X-coded w/10 PoE 802.3at/af incl.2 10GT EN50155 OS4 Managed PoE Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP21 housing w/ galvanic isolation |
8361-5191 | TPES-R6616XT-12-21-WVI | 16 10/100TX + 6 1G/2.5G/5G/10G Copper M12 X-coded w/12 PoE 802.3at/af incl.4 10GT EN50155 OS4 Managed PoE Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP21 housing w/ galvanic isolation |
8361-5193 | TPES-R6616XT-16-21-WVI | 16 10/100TX + 6 1G/2.5G/5G/10G Copper M12 X-coded w/16 PoE 802.3at/af EN50155 OS4 Managed PoE Ethernet Switch; 16.8V~137.5VDC dual input; -40~70C/-40~158F; IP21 housing w/ galvanic isolation |
P/N | Model name | Description |
---|---|---|
9000-110 | OS4 – L3L | OS4 software platform with Layer 3 Lite functions (please check Lantech software data sheet for details) |
9000-111 | OS4 – IEC61375-2-5 | OS4 software platform with IEC-61375-2-5 ETBN (Ethernet Train Backbone Networks) function (please check Lantech software data sheet for details) |
9000-112 | OS4 – L3 | OS4 software platform with Layer 3 functions (please check Lantech software data sheet for details) |
9000-113 | OS4 – R-NAT | OS4 software platform with R-NAT functions (please check Lantech software data sheet for details) |
Model name | Description |
---|---|
ECONM12-04A(F)-C-180 | 4 pin M12 (Female) A-coded 180 degree crimp type connector for power supply |
ECONM12-08A(M)-180 | 8 pin M12 (Male) A-coded 180 degree crimp type connector for reset/console/USB |
ECONM12-05A(M)-C-180 | 5 pin M12 (Male) A-coded 180 degree crimp type connector for DI/DO |
ECONM12-08X(M)-SPEEDCON | 8 pin M12 (Male) X-coded 180 degree crimp type connector for data, Ethernet CAT6A (10G), shielded, SPEEDCON |
ECONM12-04D(M)-C-180 | 4 pin M12 (Male) D-coded 180 degree crimp type connector for data |
Model name | Description |
---|---|
ECONM12-4P(F)1.5M CABLE | 4 pin M12 (Female) A-coded 90 degree cable for power supply, 150cm |
ECONM12-08M2-CONSOLE | 8 pin M12 (Male) A-coded 180 degree to RS232 cable for console, 150cm |
ECABM12X83MSTP | 8 pin M12 (Male) X-coded 180 degree RJ45 STP cable for data, shielded, 300cm |
ECAB124030MJS | 4 pin M12 (Male) D-coded 180 degree RJ45 STP cable for data, 300cm |
Model name | Description |
---|---|
USB adapter | 8 pin M12 (Male) A-coded 180 degree M12 to USB 2.0 interface adapter, 8cm |
2019 © Lantech Communications Global, Inc. ALL Rights Reserved. Privacy Policy | Terms of Service